User manual

Adding rinse aid
2
1
1
2
3
4
A
2
1
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse
phase. Fill the rinse aid dispenser when the indicator ( A) becomes clear.
Daily use
1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in user mode.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent. If you use multi-tablets, activate
the option Multitab.
5. Set and start the correct programme for the type of
load and the degree of soil.
Adding detergent
2
1
2
0
3
0
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
Adding multi-tablets
2
1
2
0
3
0
Setting and starting a programme
The AUTO OFF function
This function decreases energy consumption by deactivating automatically the appliance when it is not operating.
9