User manual

Adding rinse aid
2
1
1
2
3
4
A
2
1
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse
phase. Fill the rinse aid dispenser when the indicator (A) becomes clear.
Daily use
1. Open the water tap.
2. Press the on/off button to activate the appliance.
Make sure that the appliance is in programme selection
mode.
• If the salt indicator is on, fill the salt container.
3. Load the baskets.
4. Add the detergent. If you use multi-tablets, activate
the option Multitab.
5. Set and start the correct programme for the type of
load and the degree of soil.
Adding detergent
2
1
2
0
3
0
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
Adding multi-tablets
2
1
2
0
3
0
Setting and starting a programme
The AUTO OFF function
This function decreases energy consumption by deactivating automatically the appliance when it is not operating.
9