User manual

Residual heat indicator
Warning! The risk of burns from residual
heat!
Operating instructions
Activation and deactivation
Touch for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
•
All cooking zones are deactivated
.
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). The sound operates some time and the appli-
ance deactivates. Remove the object or clean the
control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time
comes on and the
appliance deactivates. See the table.
The times of Automatic Switch Off
Heat setting
, - - -
The cooking zone
deactivates after
6 hours 5 hours 4 hours 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to de-
crease the heat setting. The display shows the heat
setting. Touch
and at the same time to deacti-
vate the cooking zone.
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension
of the cookware.
To activate the outer ring touch the sensor field
/
. The indicator comes on. For more outer rings
touch the same sensor field again. The subsequent in-
dicator comes on.
Do the procedure again to deactivate the outer ring.
The indicator goes out.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This func-
tion sets the highest heat setting for some time (see the
illustration), and then decreases to the necessary heat
setting.
1
2
3
4
5
6
7
8
9
10
11
0
123456789
17