User manual

Buttons
Button Function Description
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.
Clock functions
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day.
DURATION To set how long the appliance operates.
END To set when the appliance deactivates.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER To set countdown time. This function has no effect on the operation of the
appliance.
Setting and changing the time
You must set the time before you operate the oven.
The flashes when you connect the appliance to the
electrical supply, when there was a power cut or when
the timer is not set.
Press the
or to set the correct time.
After approximately five seconds, the flashing stops and
the display shows the time of day you set.
To change the time of day press again and again
until starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Press again and again until starts to flash.
3. Press
or to set the DURATION time.
The display shows
.
4. When the time ends, flashes and an acoustic
signal sounds. The appliance deactivates
automatically.
5. Press any button to stop the acoustic signal.
6. Turn the knob for the oven functions and the knob
for the temperature to the off position.
Setting the END
1. Set an oven function and temperature.
2. Press again and again until starts to flash.
3. Press or to set the time.
The display shows
.
4. When the time ends, flashes and an acoustic
signal sounds. Press any button to stop the signal.
5. Turn the knob for the oven functions and the knob
for the temperature to the off position.
6. The appliance deactivates automatically.
Setting the TIME DELAY
1. Set an oven function and temperature.
2. Press again and again until starts to flash.
3. Press or to set the time for DURATION.
4. Press
.
7