User manual

1
Programme selector dial Turn the programme selector dial to the required programme.
The selector dial can be turned either clockwise or counter-clock-
wise. The green pilot light of the button 6 starts flashing: the appli-
ance is now switched on.
If you turn the programme selector dial to another programme
when the appliance is working, the red pilot light of the button 6
will flash 3 times to indicate a wrong selection. The appliance will not
perform the new selected programme.
•
To switch the appliance off , turn the programme selector dial to
the position
.
•
To cancel or change a running programme, switch the appliance
off by turning the programme selector dial to the position . Se-
lect the new programme by turning the selector to the desired pro-
gramme. Start the new programme by pressing the button 6 again.
The water in the tub will be not emptied out.
2
Temperature knob Turn clockwise this dial to select the most suitable temperature
for washing your laundry .
3
Spin reduction and Rinse
Hold option
By selecting a programme, the appliance proposes automatically the
maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want
your laundry to be spun at a different speed. The relevant light illumi-
nates.
Rinse Hold
By selecting this function the water of the last rinse is not emptied out
to prevent the fabrics from creasing. Before opening the door it will be
necessary to empty out the water.
To empty out the water, please read the paragraph «At the end of
the programme».
14