User manual

electrolux 7
7
Safety Thermostat
To prevent dangerous overheating (through
incorrect use of the appliance or defective
components), the oven is fitted with a safety
thermostat, which interrupts the power supply. The
oven switches back on again automatically, when
the temperature drops.
Should the safety thermostat trigger due to incorrect
use of the appliance, it is enough to remedy the error
after the oven has cooled down; if on the other hand,
the thermostat triggers because of a defective
component, please contact Customer Service.
Hotplate control knobs
The Control Knobs for the hotplates can be found
on the oven control panel. The energy regulator
of the hotplates can be set by means of a 7-position
control knob:
0 = Off
1 = Minimum
3 = Maximum
The intermediate positions give an increasing
heating power.
Double circuit cooking zone
If you wish to have the two electric circuits work
simultaneously, turn the knob to Max position (3)
and then turn it towards symbol “0”. You will hear
a click. Now the 2 circuits work together. Then,
you can regulate the power of the cooking zone
by turning the control knob anticlockwise.
Carefully supervise cookings with oil
or fats, since these types of food can
result in a fire, when over-heated.
Cooling fan
The fan cools the oven and control panel. The fan
switches on automatically after a few minutes of
cooking. Hot air is extracted through the vents
near the oven door handle. When the oven has
been switched off, the fan may continue to run to
cool the operating elements. This is absolutely
normal.
The action of the cooling fan will depend
on how long the oven has been used and
at what temperature. It may not cut in at all
at lower temperature settings or continue
to run if the oven has only been used for
a short time.