DISHWASHER DCS 14 W DCS 14 S INSTRUCTION BOOKLET 822 90 11-21
Contents For the installer For the user Important safety information Description of the appliance 3 Technical specifications 16 4-5 Unpacking the machine 17 - If the machine is damaged - Accossories - Identification of materials - Rinse aid dispenser - Spray arm - Coarse strainer - Fine filter - Detergent dispenser - Water softener - Water softener plug Installation - Water inlet - Water drainage - Power supply The control panel and programmes 6 Using your appliance How to load the dishwasher 7
Important safety information Before installing and first using the dishwasher, read the instruction booklet carefully, including its hints and warnings. Doing so will ensure that your machine will perform properly and to best advantage. Anyone using the machine should be thoroughly familiar with its instructions for use and safety features.
Description of the appliance 2 6 1 3 4 5 1. Rinse aid dispenser 2. Spray arm 3. Coarse strainer 4. Fine filter 5. Detergent dispenser 6.
Rinse aid dispenser Use of rinse aid will result in faster drying of the load and gives the dishes a shiny finish. It may be necessary to adjust the quantity of rinse aid dispensed if you live in either a very hard water or a very soft water area. More is needed for hard water and less for soft water.
The control panel and programmes 1 1 2 2 3 6 5 4 On/Off-button Door lock Press the button in order to start the required programme. Press the handle down and open the door. Avoid opening the door while the machine is running. If the door is opened and is put standing ajar after a completed programme the dishes will dry faster.
Using your appliance 1 2 3 4 5 6 Proceed as follows: 1. Scrape off solid food remnants. 2. Load the dishwasher. (See page 8: “How to load the dishwasher”). Pour aprox 15 g detergent into the detergent dispenser and cloce the dispenser lid. If the dishes are heavily soiled add an extra 5 g anywhere on the inside of the door. 3. Close the door. 4. Select a suitable programme. 5. Select the required temperature and eventually the option for extra drying.
How to load the dishwasher The illustration to next page shows the machine loaded with five standard place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure you will be pleased with the results. • Always place glasses, cups and bowls upside down. • Incline deep dishes (soup plates etc.) so that the water can run off when drying. • Make sure that the dishes do not rest against each other.
1 2 Instruction for verification tests. Test standard: Rated capacity: Loading of rack: Test program: Detergent (IEC type B): Rinse aid (typ III): Feed water pressure: Waste water outlet: EN 50242 5 place settings According to figure 1 Normal 65° C (+ Extra Drying) 15 gram in the dispenser Setting medium Minimum 0,8 bar, maximum 10 bar Install according to figure 2 The salt container and rinse aid dispenser shall be filled in accordance with the instruction manual.
Maintenance and cleaning Important Cleaning the cabinet Make sure that the machine is unplugged and the water turned off before undertaking any kind of maintenance. Wipe the outside of the cabinet and control panel regularly with a soft damp cloth. When necessary, use liquid kitchen or household cleaner to remove stubborn marks, rinse with a damp cloth and rub up with a soft duster. General cleaning Inspect the filters and spray arm nozzle before re-loading the machine and remove any food scraps.
If the machine is not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre, please carry out the checks listed below. Symptom Check The machine will not start. ■ Have you pressed the ON/OFF button? ■ Has the machine no power supply? ■ Check circuit-breakers/fuses (start with fuse in electrical plug).
Service Service and spare parts If you require an engineer or you wish to purchase spare parts contact your local Zanussi Service Force Centre by telephoning: 0870 5 929929 Your call be routed to the service centre covering your post code area. Before calling an engineer please read the checklist under the heading ‘If the machine is not working’, as you may be able resolve the problem yourself.
Guarantee Conditions Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate • The appliance has been used fo
Zanussi Service Force To contact your local Zanussi Service Force Centre telephone 08705 929 929 CHANNEL ISLANDS NORTH EAST GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands ORKNEY (M65) Corsie Domestics 7 King Street Kirkwall Orkney KW15 JERSEY Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY PERTH SCOTLAND PERTH (OWN SALES) SHETLAND ABERDEEN (M05) 54 Claremont Street Aberdeen AB10 6RA AUCHTERMUCHY (M03) 33a Burnside Auchtermuchy F
Zanussi Service Force To contact your local Zanussi Service Force Centre telephone 08705 929 929 MIDLANDS LONDON & EAST ANGLIA BIRMINGHAM (M18) 66 Birch Road East Wyrley Road Ind. Estate Witton Birmingham B6 6DB BECKENHAM (M79) 11A Gardener Ind. Estate Kent House Lane Beckenham Kent BR3 1QZ BOURNE (M44) Manning Road Ind. Estate Pinfold Road Bourne PE10 9HT CHELMSFORD (M47) Hanbury Road Widford Ind. Estate Chelmsford Essex CM12 3AE BRIDGNORTH (M72) 68 St.
Installation instructions Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Technical specifications DIMENSIONS WEIGHT Height 460 mm Width 450 mm Depth 480 mm (net) 17 kg (gross) 20 kg CAPACITY 5 (standard IEC place settings) WATER PRESSURES Minimum 50 kPa (0.
Unpacking the machine If the machine is damaged If the machine has been damaged during transportation, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the seller immediately. Never leave packaging material in a place where children may play with it.
Installation The dishwasher is intended for installation on a kitchen sink or worktop. It is important to ensure the dishwasher is level to avoid any difficulty opening and closing the door. Its height can be adjusted with the adjustable feet (8 mm each) in each corner of the dishwasher. Water inlet The dishwasher should be permanently plumbed into a separate cold water supply.
Water drainage The grey discharge hose should be permanently plumbed in. If this is not possible, it can be placed in the sink to drain. Don’t forget that the water will come out with some force, so position the pipe so that the force of the water will not push the hose out of the sink, use the elbow supplied which should be fitted over the pipe to support it. Ensure the sink outlet is not blocked. Connect the discharge hose to the pipe stub at the rear of the dishwasher, using the hose clip supplied.
© Electrolux Household Appliances Limited 2000
