GESCHIRRSPÜLER DISHWASHER DE 6544 D Bedienungsanleitung GB Instruction book
Contents Safety instructions 20 Description of the appliance 21 The control panel 21 Prior to using for the first time Setting the water softener Filling with salt Rinse aid 22 22 23 23 In daily use Loading cutlery and dishes The lower basket The cutlery basket The upper basket Adjusting the height of the upper basket Use of detergent 25 25 25 26 26 26 27 Washing programmes 28 Starting a washing programme 29 Maintenance and cleaning Cleaning the filters Prolonged periods of non-operation Frost
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information. ● This information has been provided in the interest of your safety.
Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. "WRD" detergent dispenser 12. Upper basket 13.
Prior to using for the first time Before using your dishwasher for the first time: Setting electronically 1. Ensure that the electrical and water connections comply with the installation instructions The dishwasher is factory set at level 3. If it’s necessary to set a new level, proceed as follows. 2. Remove all packaging from inside the appliance 1. With the dishwasher switched off press function push buttons 1 and 2 simultaneously . 3. Set the water softener 4.
Filling with salt Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting. Special salt can be added in one of two ways: ● ● If you are using dishwasher detergent that already contains salt, the detergent including the salt is placed in the detergent compartment.
To deactivate the rinse aid indicator light proceed as follows: (the dishwasher must be switched off) 1. Press function push buttons 1 and 2 simultaneously. 2. While keeping the function push buttons 1 and 2 pressed switch on the dishwasher by pressing the On/Off push button. The On/Off indicator light comes on. At the same time, the indicator lights of push buttons 1 and 2 start flashing. SO563 3.
In daily use ● Check if it’s necessary to refill with special salt or rinse aid ● Load cutlery and dishes into the dishwasher. ● Fill with dishwasher detergent . ● Select a wash programme suitable for the cutlery and dishes. ● Start the wash programme. ● Loading cutlery and dishes When loading the dishes and cutlery, please note: - Dishes and cutlery must not impede the rotation of the spray arms . - Load hollow items such as cups, glasses, pans, etc.
The cutlery basket The upper basket Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or unloading sharp items such as knives. The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the cup racks so that water can reach all surfaces.
Use of detergent Use of "3 in 1" combi detergent tablets Only use detergents specifically designed for use in dishwashers. General advice These products are tablets with combined detergent/rinse-aid and salt functions. Using no more then the correct amount of detergent contributes to reducing pollution. 1. Before using these products you should first check that the water hardness in your supply is compatible with the use of these products as per the detergent manufacturers (on the product packaging).
Washing programmes Programme Intensive 70° 80I Normal 65° (1) Quick 60° A 30I (2) Eco 50° Degree of soil and type of load Heavy soil. Crockery, cutlery, pots and pans Press the programme button 70° 80I Normal soil. Crockery and cutlery 65° Fresh soil. Crockery and cutlery 60° A 30I Normal soil.
Starting a washing programme 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 7. End of the washing programme The dishwasher will automatically stop and the end of programme phase indicator light will illuminate. The indicator light of the programme just ended will remain on. The dishwasher has finished the programme only when the end of programme indicator light is illuminated.
Maintenance and cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). To ensure a correct working of the dishwasher, NEVER try to remove the upper spray arm. Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth.
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer. ...a flashing fault code appears The dishwasher will not start or stops during operation. All push buttons are inoperative except for the On/Off push button and a combination of indicator lights, as indicated in the following chart, are flashing.
...the wash results are not satisfactory The dishes are not clean ● ● ● ● ● ● ● ● The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used.
Installation instructions Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Water supply connections This dishwasher may be fed with either hot (max. 50°) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. Remove all packaging before positioning the machine.
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following ways: Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door on the right. 1. To the sink outlet spigot, securing it if necessary with a clip. Before plugging the appliance into the wall socket, make sure that: 2. Hooked over the edge of the sink using the special curved plastic guide provided. 1.
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes" chart).
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.
