EN User manual 2 Dishwasher ZDF3020 Downloaded from DishWasher-Manual.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Setting the water softener _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Use of rinse aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ 8 Use of detergent _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Multitab function _ _
• Do not change the specifications or modify this product. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mains cable or water hoses are damaged, – if the control panel, worktop or plinth area are damaged, that you can get access to the inner side of the appliance. Contact your local Service Force Centre. • Do not drill into the sides of the appliance to prevent damage to hydraulic and electrical components.
Indicator lights Rinse aid 1) Comes on when it is necessary to fill the rinse aid container. Refer to 'Use of rinse aid'. 1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme operates. Programme knob • To switch on the appliance or to set a washing programme, turn the programme knob clockwise or counterclockwise. The programme marker on the programme knob must agree with one of the washing programmes on the control panel.
Washing programmes Washing programmes Programme and programme knob position 1) 2) 3) Degree of soil Type of load Programme description Any Crockery, cutlery, pots and pans Prewash Main wash up to 45°C or 70°C 1 or 2 intermediate rinses Final rinse Drying Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying Normal soil Crockery and cutlery Prewash Main wash up to 50°C 1 intermediate rinse Final rinse Drying Any Partial load (to be c
The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of procedure: 1. Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener. 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4. Load cutlery and dishes into the dishwasher. 5.
2 Set switch to position 1 or 2. 1 Electronic adjustment The water softener is set at the factory at level 5. 1. Press and hold the start/cancel button. Turn the programme knob counterclockwise until the programme marker agrees with the first washing programme on the control panel. 2. Release the start/cancel button when the digital display shows the current setting. Examples: – level 5 = – level 10 = 3. Press the start/cancel button to change the water softener level.
Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance. Adjusting the dosage of rinse aid AX + M 1 1 2 3 4 AX + M 2 The rinse aid dial is set at the factory at position 3. To increase or decrease the dosage refer to 'What to do if...
1 Arrange service dishes and large lids around the edge of the lower basket. 2 1 Arrange the items to let water touch all surfaces. 2 For longer items fold the cup racks up. Prevent to put plates in the first three sections in the front part of the upper basket. Make sure the plates tilt forward. Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to the upper position.
Caution! • Do not lift or lower the basket on one side only. • If the basket is in the upper position, do not put cups on the cup racks. Use of detergent Only use detergents (powder, liquid or tablet) that are applicable for dishwashers. Follow the data on the packaging: • Dosage recommended by the manufacturer. • Storage recommendations. Do not use more than the correct quantity of detergent to save an environment. 5 6 Different brands of detergent dissolve in different times.
Activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the multitab function when the programme operates. Cancel the washing programme, then set the programme again. To activate the multitab function: • Press the multitab button. The multitab indicator light comes on. To deactivate the multitab function: • Press the multitab button. The multitab indicator light goes off. 1. 2. 3.
The washing programme is cancelled. At this time you can do these steps: 1. Switch off the appliance. 2. Set a new washing programme. Fill the detergent dispenser with detergent before you set a new washing programme. Setting and starting a washing programme with delay start 1. Set a washing programme. 2. Press the delay start button until the display shows the necessary delay start time for the washing programme. Delay start time flashes in the digital display. 3. Press the start/cancel button.
Important! Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail stick. External cleaning 4 3 To remove filters B and C, Remove the flat filter A turn the handle approxi- from the bottom of the apmately 1/4 anticlockwise. pliance. Clean the external surfaces of the appliance and control panel with a damp soft cloth. Only use neutral detergents. Do not use abrasive products, scouring pads or solvents (acetone, trichloroethylene etc...).
Fault code and malfunction Possible cause and solution • the digital display shows The dishwasher will not drain • There is a blockage in the sink spigot. Clean the sink spigot. • The connection of the water drain hose is not correct. The hose can be kinked or squashed. Make sure that the connection is correct. • the digital display shows The anti-flood device operates • Close the water tap and contact your local Service Force Centre. The programme does not start • The appliance door is not closed.
The cleaning results are not satisfactory Dry water drop signs on glasses and dishes • Increase rinse aid dosage. • The detergent can be the cause. Technical data Dimensions Width cm 60 Height cm 85 Depth cm 61 Electrical connection - Voltage Overall power - Fuse Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door.
Install the appliance worktop to the appliance if you want to use the dishwasher as a freestanding appliance. The plinth on freestanding appliance is not adjustable. Adjusting the level of the appliance 1 2 3 4 Make sure that the appliance is level to close and seal the door correctly. If the level of the appliance is correct, the door does not catch on the sides of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the appliance is level.
If you connect the water drain hose to a trap spigot under the sink, remove the plastic membrane (A). If you do not remove the membrane, remaining food can cause a blockage in the drain hose spigot. Caution! Make sure that the water couplings are tight to prevent water leakage. Electrical connection Warning! The manufacturer is not responsible if you do not follow these safety precautions. This appliance needs to be earthed according to safety precautions.
Downloaded from DishWasher-Manual.
Downloaded from DishWasher-Manual.
www.zanussi.com Downloaded from DishWasher-Manual.com Manuals 156985782-00-102009 To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi.co.
