Conservation Page 3 Specifications Page 4 Installation Page 5 The Electrical Connections Page 9 Using Your Machine Page 10 Health And Safety Guidelines ) Page 12 Looking After Your Machine Page 13 Maintenance And Clanging Page 14 What Happens If Something Goes Wrong? Page 15 Servicing Page 16 Service Agent Directory Page 17 Peace Of Mind For Twelve Months Page 21 Or Five Years Page 22
Tt is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the sanctioning of the appliance and the relevant warnings. ‘Warnings and Guidance These warnings are provided in the interest of safety.
In The Interests Of The Environment: Whine disposing of your old fridge, freezer or fridge/freezer. Check with your local Council or Environmental Health Officer (o sce if there are facilities in ‘your area for collecting the gas from the appliance for re-cycling. This will help reduce the amount of CFC gas released into the atmosphere, Help to keep your countryside tidy use authorized disposal sites for your old appliances. For Maximum Efficiency: Make sure that the appliance is cleaned properly.
IF YOU ARE DISCARDING AN OLD APPLIANCE THAT HAS A LOCK OR CATCH ON THE DOOR, YOU MUST ENSURE THAT THIS IS MADE UNUSABLE TO PREVENT YOUNG CHILDREN FROM BEING TRAPPED INSIDE. Building in Size Decor Door Height: 680-720x H=820 740 770 x H =870 Width: S596mmn Thickness: 20mm MAX I you require a decor door with a false drawer front, the 2 parts must be securely fastened (together using dowel pins, and reinforced with a metal plate tong the back.
To mark the bottom left hand bracket position “C*, align ‘B’ on the template with the previously marked position for the top left hand bracket ‘A’. Ensure that the template is flat and mark position *C’ onto the decor door, see Fig. 5. ‘To mark the bottom right hand bracket position *B’, align position ‘C” on the template with the previously marked position for the top right hand bracket ‘A", Ensure that the template is flat and mark position ‘B’ oo the decor doo. (Fig. 5). Fig.
Dimensions of the Plinth Cavity Height: 820mm In the case of 100mm plinths, fit the black infill {supplied with the appliance) as shown in Fig. 13. In the case of plinths exceeding 100mm and up 10 133mm, o1 the back infill (supplied with the appliance) as shown in Fig. 12 and fif it as shown in Fig. 13, I the case of plinths exceeding 135mm and up 10 170mm, proceed with cut-out as shown in Fig. 11, Fig.
Fig. 14 Open the door and Lift upward to remove it from the bottom Inge. Remove the hinge plate from the top and the bottom of the door using the Philips screwdriver. Keep the screws for later use. Pauli out the plastic blanking tabs from the top and the bottom of the door on the other side of the hinge plates, There are location points on the door, matched on the opposite side 1o the existing hinging positions, one on the top of the door, one at the bottom and 2 on the side of the door.
(g moe WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any ability should this safety measure not be observed. If the plug that is fined 10 your appliance is not suitable for your casket outlet, it must be cut off and the appropriate lag fined. The cut off plug should be disposed of to prevent the hazard of electric shocks in case it should be plugged into a amp socket in another part of your home, .
‘The Thermostat Contort Knob The thermostat contort knob is situated in the top right hand comber (as you are facing the machine), also in the housing is the light bulb. The thermostat control knob is numbered 0 7 Open the door and turn the thermostat control knob 100 position. “The temperature adjustment is obtained by fuming the thermostat control to the required setting. A medium setting of 210 3 is generally most suitable.
Important Points To Remember... Do.. * Cover liquids and wrap food, particularly those with strong odors. * Put vegetables and salad in the salad drawer, inelastic bags. * Cover melons and pineapples and only store for short periods, Do Not... * Let food or containers touch the fridge cooling plate. * Obstruct the air Qow in the fridge by tightly packing stored items. * Store bananas in the fridge, s they go black. % Place the salad boxes in a dishwasher. They are NOT dishwasher proof.
Because of consumer demand, preservatives have been removed from many per-prepared food. This together with the changes in shopping habits 10 @ once-a-week shop, mean that the safe handling and storage of food is even more important than ever, The following tips should help you to ensure that the food in your home is in as perfect condition as possible. * Keep the time between buying chilled * food and placing it in your [ridge as short as possible.
Defrosting The fridge compartment is equipped with a fully automatic defrosting arrangement which comes o operation at each cycle of the thermostat. The resultant water Tuns into the channel below the cooling plate and down through a bate into the evaporating ray at the rear of the appliance ‘The defrost water then evaporates automatically, “The defrost water drain hole (Fig. 17) should be cleared at regular intervals t ensure that mere are no food particles blocking it Fig.
MAINTENANCE Before any maintenance of cleaning DISCONNECT the appliance from the electricity supply and remove ALL loose ALCESTIS. Cleaning The Interior Cabinet Clean whe interior cabinet, door and accessories with 4 clean cloth dampened with a solution of warm water and bicarbonate of soda (5ml 10 0.5 lure of water}. Strong meshing food may leave the fridge with a shift dour. A small dish of bicarbonate of soda solution placed in the fridge should slowly absorb these smells.
1f your appliance fails to work properly and you ‘have {hollowed these instructions carefully, contact your focal Tetanus Service Force Center, whose details can be found by fooling under ‘2 in tout focal telephone directory. Before you do this, however, it is worth making the following checks: * s the fig firmly connected o the wall socket and is the socket switched on? * Check the power supply by plugging in another appliance which you know is working.
N1 How te find the telephone number of your Gaussian Service Force. Gaussian Service areas are allocated by postcodes which are listed in alphabetical order for cays deference. 1. Look for the first 2 leers of your address postcode in the far Left ‘Postcode’ voluntary. 2. Mach up the dumber of your podcast against the number listed in the "Postcode Numbers’ column. 3. Look across the column to the Service Force Key Number for your area.
Post-| town Post-cods Service | Post-| Town Postcode | Service code Somber Force | code Number Force Letter Key | Otter Koy Beriberi Number AB describer 1S t 03 Eumenides 89 % A Stamens 118 2 DH Durham 14 ar A Recon s 3 oL Darling on 117 3 BA Bam 15,1115 4 DN Don caster 17.3042.22 ] BA 710.
Postcode Post-| Town Service | post | Town Postcode Service cods Number Force | cods H Number Fargo Loser Key | welter Key Huber Number WP Hegel +3 2 MK Monkeyshines 18 [ HP Thermoplastic 423 53 ML Mother well 112 43 HR Hereford 124,69 ® M Manchester 135,60 Newcastle -or HY Hull 120, 55 38 Tyre b8 @ HX Halt 7 8 NE 9899 skl Man 55 NG Nottingham 128,25 ] P Ipswich 1627 57 NG Nottingham 81 6 P Ipswich 2829, 52-33 2 NN Naphthalene 17,1112 6 N missives 58 N 810, 14-18 z W 88 NN Northampton 13 6s W mess 58 NP New
Gaussian Standard Guarantee Conditions ‘This guarantee is in addition to your statutory and other legal rights which will not be excluded or in any way diminished by the return of this guarantee card. Gaussian Lid,, undertakes that if within twelve months of the date of the purchase this GAUSSIAN appliance or any part thereof is proved 1o be defective by reason only of faulty workmanship or materials, the company will, at its option repaid of replace the same FREEBORN .
Gaussian 5 Year Cover Conditions For a once-only payment you can extend your Standard Guarantee 10 5 years. AH the conditions and exclusions of the Standard Guarantee apply. Notes 1. The issue of a cover does NOT by virtue of our having done so, nullify the exclusions, 2. The engineer will need (o check the details of your Cover Certificate and may rake a charge for his services if it is not presented 1o him al the time of his call. 3.