Owner`s manual

13
Connecting Your Equipment
Before making or changing the connections, switch off the power and disconnect the
power cord from the AC outlet.
Audio/Video Cables
Use audio/video cables (not supplied) to
connect the audio/video components and a
video cable to connect the monitor TV.
Connect red plugs to R (right), white plugs
to L (left), and the yellow plugs to VIDEO.
Be sure to insert completely.
S-Video Cables
Use S-video cables (not supplied) to get
clearer picture reproduction than regular
video cables.
Connect from an S-video jack on the rear of
the receiver to an S-video jack on the video
component you are connecting.
Be sure to insert completely.
L
R
VIDEO
S VIDEO
Digital Audio Cables/
Optical Cables
Use coaxial digital audio cables or optical
cables (not supplied) to connect digital
components to this receiver. Standard video
cables can also be used for coaxial
connections.
Be sure to insert completely.
Digital audio coaxial cable
(or standard video cable)
Optical cable
Component Video Cables
Use component video cables to get the best
possible color reproduction of your video
source. The video signal is divided into the
luminance (Y) signal and the color (PB and
PR) signals and then output. In this way,
interference between the signals is mini-
mized. Connect from the component video
jacks on the rear of the receiver to the
component video jacks on the video
component you are connecting.
Y
P
B
P
R
Green
Blue
Red