Owner`s manual

25
Controls and Displays
2 DTS
When the Standard mode of the receiver
is on, this lights to indicate decoding of a
DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver
is on, this lights to indicate decoding of a
Dolby Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver
is on, this lights to indicate Pro Logic II
decoding.
5ATT
Lights when INPUT ATT is used to
attenuate (reduce) the level of the analog
input signal.
6 DIRECT
Lights when source direct playback is in
use. This function bypasses all tone,
balance, DSP and Dolby Surround
effects.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when
MONITOR is selected (page
43).
9 Speaker indicator
Shows if the speaker system is on or not.
SP
33
33
3A indicates the speakers are
switched on.
SP
33
33
3 indicates the headphones are
connected.
10 Character display
11 ADV SURR (Advanced Surround)
Lights when one of the Advanced
Surround modes has been selected.
12 LOUDNESS indicator
Lights when the LOUDNESS is on. Use
to boost the bass and treble at low
volume.
13 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO:
Lights when the mono mode is set using
the MPX button.
TUNED:
Lights when a broadcast is being
received.
14 Master volume level
Shows the overall volume level. ---dB
indicates the minimum level, and -0dB
indicates the maximum level.
Notes:
Depending on your level settings for each
channel, the maximum level can range
between –10dB and 0dB.