Owner`s manual

27
Controls and Displays
CH SELECT (page 39)
Selects a speaker when setting up the
surround sound of the receiver.
LEVEL +/
−−
−−
− (page 39)
Adjusts the levels of the surround sound
of the receiver.
EFFECT +/
−−
−−
− buttons (page 32)
Adds or subtracts the amount of effect
with different advanced listening modes
(except 5 Ch Stereo and Virtual SB).
5 Component/Tuner controls
The main buttons (3, 7, etc.) are used to
control a component after you have
selected it using the
MULTI CONTROL
buttons. The tuner/DTV controls above
these buttons can be accessed after you
have selected the corresponding MULTI
CONTROL button — TUNER or DVD
(when connected to DTV).
DTV INFO
Use to bring up information screens on a
digital TV.
MPX/RETURN (page 40)
Switches between stereo and mono
reception of FM broadcasts. If the signal
is weak then switching to mono will
improve the sound quality.
D ACCESS (page 40–41)
After pressing, you can access a radio
station directly using the number
buttons.
T EDIT/GUIDE (pages 41–42)
Press to memorize and name a station for
recall using the
P-SET }/] buttons.
Also displays the guides on a digital TV
and acts as a pause button for CDs, tapes,
or DVDs.
BAND (page 40)
Switches between the tuner AM and FM
bands.
CLASS (pages 41–42)
Switches between the three banks
(classes) of radio station presets.
DTV/DISP
Switches a digital TV on/off. It can also be
used to switch the display between the
station preset name and the frequency for
the tuner.
DTV MENU
Displays menus on a digital TV.
6 DVD controls (Press DVD first to
access)
These controls will also function as DTV
controls, depending on the component
you have selected.
TOP MENU
Displays the ‘top’ menu of a DVD disc.
AUDIO
Changes the audio language or channel.
SUB TITLE
Displays/changes the subtitles included in
multilingual DVD-Video discs.
ANGLE
Switches camera angles on discs with
multi-angle scenes.
7 REMOTE SETUP (pages 41–47)
Press this button to set up the remote
control to control other components.
8 RECEIVER CONTROL buttons
STANDARD (page 29)
Press for Standard decoding and to
switch between the various Pro Logic II
options.
ADV SURR (page 30)
Use to switch between the various
surround modes.
STEREO (page 29)
Switches direct playback on or off. This
bypasses the tone controls and channel
levels for the most accurate reproduction
of a source.