Owner`s manual

31
Playing Sources
Pro Logic II
Music
Pro Logic
Pro Logic II Movie
4 Start playback of the component
you selected in step 1.
Using Stereo/Direct
When you select STEREO or DIRECT, you
will hear the source through the front left
and right speakers only and possibly your
subwoofer, depending on your speaker
settings. Dolby Digital and DTS
multichannel sources are downmixed to
stereo. See page 29 for more on these
modes.
Press STEREO (STEREO/DIRECT on
the front panel) repeatedly to switch
between the two options.
Note:
If you switch on Midnight listening,
Loudness, or the tone controls when
DIRECT is selected, the receiver automati-
cally switches to STEREO.
Using Advanced
Surround
Dolby Pro Logic, Dolby Digital and DTS
signal processing is done automatically
corresponding to the input signal.
Press ADV SURR (ADVANCED
SURROUND
on the front panel)
repeatedly to cycle the sound
options.
• Some DVD players do not output DTS
signals. For more details, refer to the
instruction manual supplied with your
DVD player.
Listening to Multi-
Channel Playback
CHANNEL
ENTER
ENTER
MPX/RETURNDTV INFO
DTV/DISP DTV MENU
D ACCESS T EDIT/GUIDE
P-SET P-SET
TUNING
TUNING
T
P
S
E
U
CLASS
FL DIMMER
BAND
TOP MENU AUDIO
SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV SURR STEREO
ANGLE
1¡
4
¢
7
8
3
¶
LEVEL
DVD VCR CD-RTV
RCV
TUN
TVC
CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL.
MUTE
NIGHT
LOUD
SIGNAL SEL
MULTI CONTROL
EFFECT+10
RECEIVER
POWER
SOURCE
POWER
1
2
3
4
5
6
7
8
9
0
DISC
1 Switch on the playback
component.
2 Select the source you want to
playback.
Use the MULTI CONTROL buttons on the
remote (or MULTI JOG dial on the front
panel).
3 Press STANDARD.
If the source is Dolby Digital, DTS, or
Dolby Surround encoded, the proper
decoding format will automatically be
selected and show on the display.
If you are listening to a two channel
source, each press changes the display as
follows: