Owner`s manual

40
Using the Tuner
Listening to the Radio
The following steps show you how to tune
in to FM and AM radio broadcasts using the
automatic (search) and manual (step) tuning
functions. If you already know the frequency
of the station you want, see “Tuning Directly
to a Station” below. Once you are tuned to a
station you can memorize the frequency for
recall later—see “Saving Station Presets” on
the next page for more on how to do this.
CHANNEL
ENTER
ENTER
MPX/RETURNDTV INFO
DTV/DISP DTV MENU
D ACCESS T EDIT/GUIDE
P-SET P-SET
TUNING
TUNING
T
P
S
E
U
CLASS
FL DIMMER
BAND
TOP MENU AUDIO
SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV SURR STEREO
ANGLE
1 ¡
4
¢
7
8
3
¶
LEVEL
DVD VCR CD-RTV
RCV
TUN
TVC
CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL.
MUTE
NIGHT
LOUD
SIGNAL SEL
MULTI CONTROL
EFFECT
+10
RECEIVER
POWER
SOURCE
POWER
1
2
3
4
5
6
7
8
9
0
DISC
1 Press the TUN button on the
remote control to select the tuner.
You can also use the MULTI JOG dial on
the front panel.
2 Use the BAND button to change
the band (FM or AM), if necessary.
Each press switches the band between
FM and AM.
3 Tune to a station.
There are three ways to do this:
Automatic tuning
To search for stations in the currently
selected band, press and hold
TUNING
‘’ for about a second. The receiver will
start searching for the next station,
stopping when it has found one. Repeat
to search for other stations.
Manual tuning
To change the frequency one step at a
time, press
TUNING ‘’.
High speed tuning
Press and hold TUNING ‘’ for high
speed tuning. Release the button at the
frequency you want.
Improving FM Stereo Sound
If the TUNED or STEREO indicators do not
light when tuning to an FM station because
the signal is weak, press the MPX button to
switch the receiver to mono reception. This
should improve the sound quality and allow
you to enjoy the broadcast.
Tuning Directly to a Station
If you already know the frequency of the
station you want to listen to, use the number
buttons on the remote control to enter the
frequency directly.
1 Press the TUN button on the
remote control to select the tuner.
You can also use the MULTI JOG dial on
the front panel.
2 Use the BAND button to change
the band (FM or AM), if necessary.
Each press switches the band between
FM and AM.
3 Press D ACCESS (Direct Access).