1t is most important that this instruction book should be retained with the appliance for future reference., Should the appliance be sled or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. Warnings — Built-in ovens THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY.
Contents Building in . Connecting to ECMAScript Use and Care , . . Using the upper oven Using the lower oven Using the grill . Maintenance and cleaning, What happens if something goes wrong page page page page page page page page Important: the installation of the oven and connecting it to electricity must always be done by competent installers and to standards and regulations currently in force.
Building-in 1t is important that the dimensions and materials of the surround or cabinet into which the oven will be built are correct and that proper arrangements are made for a continuous supply of air to the oven so it does not overheat. . Opes Fig. 1 Dimensions of the recess for building into a kitchen unit {mm). Fig.
Important To ensure an efficient ventilation, it is necessary to leave the vents provided at the bottom of the oven clear. Securing the oven to the cabinet Fit the appliance into the cabinet recess. Open the oven door and secure the oven to the kitchen cabinet with six wood resews which fit exactly the holes provided in the oven [mare (Fig. 8). Cooling fan The cooling fan is designed to cool the oven housing and the components of the oven itself.
Connecting to electricity The oven is designed to be connected to 240V 50 Hz electricity supply. The upper oven has a heating element rated at 2500W. The lower oven ratings are as follows: Lower element 1000 W Upper element 1000 W Grill element 2000 W The oven has an easily accessible terminal block which is marked as follows: Letter L Live terminal Letter N Neutral terminal =+ Barth "The cable used must be of the three core type with a min.
Use and care ‘When the appliance is first installed Once the appliance is installed the protective materials which were put on in the factory must be removed. The plastic film covering some external parts ean he removed by wiping with a cloth dipped in mentholated spirit. Other protective materials will burn off if the controls of the ovens are turned to MAX and then let the ovens to run empty for 30 minutes. ‘This will also remove any unpleasant smells. The FM 16 consists of two ovens.
Electric programmer b Oven general control light k ¢ Lower oven selector knob d Lower oven temperature regulator knob ¢ Lower oven temperature light f Upper oven temperature light g Upper oven control knob h Fan i Removable shelf runners j Removable grease filter k Upper oven 1 Lower oven m Dripping pan, large n Reversible grill pan insert 0 Removable handles (2 Off) Fiv 4
Using the upper oven As soon as the oven is switched on the fan starts and runs until the oven control is switched off again {Fig. 5). The food should be put into the oven before switching on, even when cooking manually the speed of heating up is so fast that there is no need to preheat. The oven shelves can be fully filled. Most normal types and materials of cooking utensils can be used.
Cooking automatically The upper oven cooks automatically when the programmer is set to switch it on and off at the times given without the need for anyone to be in attendance. Most foods cook well automatically but preference should be given to those which will not be affected by the waiting period before the oven comes on, Electric programmer The function of the programmer is to turn on and off, automatically the upper oven's heating element and thus to change the preset cooking time as one pleases.
Example of programmer setting for automate operation of the oven. Cooking start time: 17.00 hours; Cooking duration: 90 minutes (max. 180 minutes); Press and turn knob A, setting the C-hand on 5 (corresponding te 17.00 hours); Turn knob B, setting dial D to 90; Turn the vane control knob (Fig. 5) to the desired temperature level. After carrying out the above settings, the oven will operate automatically from 17.00 hours to 18.80 hours, ie, for 1 hour and 30 minutes.
Fig. § max 100 250 * Using the grill The grill is located in the lower oven. As with the oven, the grill control can be set to a number of different heats (Fig: 8) At MAX position the maximum temperature is obtained, Foods to be grilled are placed on the wire grid in the grill pan which ean be adjusted on the side grids either upwards or downwards to give the required distance from the element. For foods which require a longer grilling, the grill pan has to be set on the lower positions.
Maintenance and cleaning Important The electricity supply must be switched off before undertaking any maintenance operation, The oven will have a longer life if it is frequently cleaned thoroughly, paying special attention to the following: The cleaning should not be carried out when the oven is still warm; The enameled parts showed be cleaned with lukewarm water and soap without using abrasive scourers which may damage them; The parts in stainless steel after their cleaning, are to be dried with chamois le
A0202 Fig. ¢4 Removing and cleaning the oven panels (Supplied on request) 1f you wish to remove lateral and upper panels proceed as follows Remove the upper panel; unscrew the fixing ring nuts of the side runners (Fig. 12} Remove the runners and the panels (Fig. 13): If necessary, vou can also remove the back panel, but in this case you have also to disconnect the electricity supply.
Replacing appliance components Prior to undertaking any maintenance work or replacing the oven lamp or grill heating element, be sure to disconnect the appliance from the electric supply. 1. Control Krebs These can be removed by pulling them out. 2. Oven lamp replacement Unscrew glasshouse (Fig. 16) and replace burnt-out bulb with one that resists to high temperatures Electric bulb: 15W, 240V, 501z, 300"C. El4.
‘What happens if something goes wrong Important If the ovens do not come on when cooking manually, first check that the fault is with both ovens it may be that if it is the upper one only that is affected there is probably a simple answer the programmer is set to automatic to set it to manual turn the control knob to the required position.
TETANUS! APPLIANCE GUARANTEE GAUSSIAN STANDARD GUARANTEE CONDITIONS This guarantee is in addition to your statutory and other legal rights which will not be excluded or in any way diminished by the return of the guarantee card.
