Service manual

17
4.4 Sequence of operations
1. Open the door and press S0 button:
 The LCD display lights up with a welcome message
2. Select delayed start if desired (see 4.3.10) and/or any desired options
SELECTING THE CYCLE
3. Select the desired programme
The following appears on the LCD:
 The name of the programme
 The time from the beginning to the end of the cycle, in minutes
 The number of segments corresponding to the number of phases in the selected wash cycle
 The symbols that characterise the programme
START
4. Press the “OK/START” button and close the door
If delayed start has been selected:
 The countdown starts: The time decreases by hours [19 hrs – 18 hrs …..1 hr] and by minutes
during the final hour [1 hr - 59 min – 58 min… 0]
 When the countdown is over, the machine starts automatically
RUNNING OF
THE CYCLE
5. During the cycle, the Beam on Floor, if featured, will project a beam on the floor
NB: The time to the end of the cycle decreases by minutes and is updated at the beginning of every
new phase in the cycle.
6. To interrupt a programm in progress:
 Open the door carefully
or
 Switch the appliance off with S0 button
NB: To restart the programme, close the door and/or press button S0 once again
CANCELLING/INTERRUPTING THE CYCLE
7. To cancel a programme in progress:
 Open the door carefully
 Simultaneously press the buttons associated to “Cancel” function
 The display shows the message “Interrupt?”
 Press the “OK/START” button to confirm cancellation
8. At the end of the programme:
 The buzzer sounds a number of times
 The Beam on Floor, if featured, will switch off
 The display shows END OF CYCLE and SWITCH OFF
END
9. Press button S0 to turn the appliance off