Operation Manual

Building-in

Dimensions of the recess

ZBA 3154 ZBA 3224

Height of housing (1)880 1225 mm

Depth of housing (2) 550 550 mm

Width of housing (3) 560 560 mm

It is necessary that the niche is provided with a

conduct of ventilation having the following

dimensions:

Depth 50 mm

Width 540 mm

PR0

540

For appropriate venting, follow indications in the

figure.

50 mm

min.

200 cm

min.

D526

D022

1.Fit the appliance in the niche by making sure that

it stands against the interior surface of the unit on

the side where the door hinges of the appliances

are fitted. Insert the appliance until the upper strip

butts up against the unit (1) and make sure that

the lower hinge is in line with the surface of the

unit (2).

2.Press in the joint covers between the appliance

and the kitchen furniture.

D132

3.Open the door and push the appliance against the

side of kitchen furniture opposite to that of the

appliance hinges. Fasten the appliance with 4

screws (I)provided in the kit included with the

appliance.