BUILT-IN OVEN ZBF 560 INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance GB
Important Safety Information You MUST read hese warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 727727 Installation • This oven must be installed by qualified personnel to the relevant British Standards. • Ensure that all control knobs are in the OFF position when not in use. • This oven is heavy. Take care when moving it. • • Remove all packaging, both inside and outside the oven, before using the oven.
Contents For the User For the Installer Important Safety Information 2 Technical Data 17 Description of the Oven 4 Installation 17 Controls 5 Electrical Connection 17 Before the First Use 6 Building In 18 Electronic Programmer 7 Using the Oven 9 Hints and Tips 9 The Fan Oven 10 Cooking Chart - Fan Oven 11 Grilling 12 Defrosting 13 Cleaning the Oven 14 Replacing the Oven Light 15 Something not Working 16 Guarantee/Customer Service 19 European guarantee 20 Environment
Description of the Oven 6 5 4 3 2 1 7 8 9 10 11 1. Control panel 7. Air Vents for Cooling Fan 2. Oven Control Function Knob 8. Grill 3. Electronic Programmer 9. Oven Light 4. Thermostat Control Knob 5. Mains on Light 10.Oven Fan 11. Rating Plate 6.
Controls Push-Pull control knobs Some models are provided with push-pull control knobs (Fig. 1). These knobs can be completely sunken inside the control panel when the oven is not working. Oven Function Control Knob 0 The oven is off Oven light - The oven light will be on without any cooking function Inner grill element only - Can be used for grilling small quantities Full Grill - The full grill element will be on. Recommended for large quantities.
The cooling fan The cooling fan operates during cooking. Air is expelled through vents between the oven door and the control panel, as shown in the diagram. The cooling fan may run on after the oven is switched off to keep the controls cool. This is quite normal. Before the First Use Remove all packaging, both inside and outside the oven, before using the oven. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal.
Electronic Programmer 4 1. Push button for selecting a function 5 6 7 8 2. Decreasing control button “ ” 3. Increasing control button “ ” 4. Display 5. “Cooking Duration” pilot lamp 6. “End of cooking” pilot lamp 2 1 3 7. “Minute minder” pilot lamp 8. “Time of day” pilot lamp The oven will only work if the time of day has been set. However, the oven can also be operated without any programme.
“End of cooking” function With this function, you can set the oven to switch off automatically when a programmed end of cooking time is over. Place food in the oven, select a cooking function and adjust the cooking temperature. Press button repeatedly to select the “End of cooking” function. The relevant pilot lamp will start flashing. Then, proceed as follows: To set the End of cooking time: 1. Press button “ ” or “ ”. 2.
Using the Oven Always cook with the oven door closed. Stand clear when opening the drop down oven door. Do not allow it to fall open - support the door using the door handle, until it is fully open. The oven has four shelf levels, and is supplied with two shelves. The shelf positions are counted from the bottom of the oven as shown in the diagram. It is important that these shelves are correctly positioned as shown in the diagram. Do not place cookware directly on the oven base.
The Fan Oven The air inside the oven is heated by the element around the fan situated behind the back panel. The fan circulates hot air to maintain an even temperature inside the oven. The advantage of cooking with this function is energy saving through: z Faster Preheating As the fan oven quickly reaches temperature, it is not usually necessary to preheat the oven although you may find that you need to allow an extra 5-7 minutes on cooking times.
Cooking Chart- Fan Oven Weight (gr.) Cooking times in the tables do not include pre-heating. We recommend to pre-heat the oven for about 10 minutes before cooking.
Grilling Grilling must be carried out with the oven door closed. The grill pan handles must be removed from the pan during grilling. Always use oven gloves to remove and replace the grill pan handles. Ensure that you support the grill pan when removing it from the oven. ) How to Use the Full Grill 1. Set the oven control function knob to . 2. Set the thermostat control knob to the required temperature. 3. Adjust the grid and grill pan runner position to allow for different thicknesses of food.
) How to Use the Thermal Grill Hints and Tips Thermal grilling offers an alternative method of cooking food items normally associated with conventional grilling. The grill element and the oven fan operate alternately, circulating hot air around the food. The need to check and turn the food is reduced. Thermal grilling helps to minimize cooking smells in the kitchen. With the exception of toast and rare steaks, you can thermally grill all the foods you would normally cook under a conventional grill.
Cleaning the Oven Before cleaning always allow the cooling fan to cool the oven down before switching off at the electricity supply. This appliance cannot be cleaned with steam or with a steam cleaning machine. The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Oven Shelves and Shelf Supports Clean the oven shelf support before proceeding to the catalytic cleaning of the oven.
Care of catalytic enamel As cooking produces oil, fats, splashes of food, etc., catalytic enamel destroys them. To clean the oven cavity, proceed as follows: 1. remove the oven accessories, if present (e.g. pans, grids, baking tray, dripping pan, etc.). Do not leave anything inside the oven. 2. Select the Conventional Oven Function by touching the "Cooking Functions" control until the symbol appears in the display. 3. Set the temperature to 250°C using control .
Replacing the Oven Light If the oven bulb needs replacing, it must comply with the following specifications: - Electric power: 15 W/25 W, - Electric rate: 230 V (50 Hz), - Resistant to temperatures of 300°C, - Connection type: E14. These bulbs are available from your local Service Force Centre. To replace the faulty bulb: 1. Ensure the oven is disconnected from the electrical supply. 2. Turn the glass cover anticlockwise. 3. Remove the faulty bulb and replace with the new one. 4. Refit the glass cover. 5.
Installation The oven must be installed according to the instructions supplied. This oven must be installed by qualified personnel to the relevant British Standards.
Building In Please ensure that when the oven is installed it is easily accessible for the engineer in the event of a breakdown. Building In The surround or cabinet into which the oven will be built must comply with these specifications: z the dimensions must be as shown in the relevant diagrams; z the materials must withstand a temperature increase of at least 60 °C above ambient; z proper arrangements must be made of a continuous supply of air to the oven to prevent the oven overheating.
Guarantee/Customer Service Standard guarantee conditions We, Zanussi-Electrolux, undertake that if within 12 months of the date of the purchase this Zanussi-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: · The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
European guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
ZBF 560 0,78 kWh 53 43 min. 41 min.
35689-6203 11/06 Grafiche MDM - Forlì www.zanussi-electrolux.co.