User manual

Problem Possible cause Remedy
The oven does not cook evenly. Check that the appliance is correctly
installed and levelled, and that you
use the recommended temperatures
and shelf positions.
The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.
Steam and condensation settle on the
food and in the oven cavity.
You left the dish in the oven for too
long.
Do not leave the dishes in the oven
for longer than 15-20 minutes after
the cooking process ends.
The appliance makes noises or pop-
ping sounds.
When the gas is drawn through the
burner, it can compress as they heat
up. Some metal parts of the appli-
ance expand and contract when they
heat up or cool down. The noises are
normal.
The flame colour is orange or yellow. The flame can look orange or yellow
(flame disturbance) in some areas of
the burner because of how the burner
is made. This is normal.
If you cannot find a solution to the problem yourself, con-
tact your dealer or the service centre.
The necessary data for the service centre is on the rating
plate. The rating plate is on the front frame of the oven
cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
Installation
Warning! Refer to "Safety information" chapter.
Dimensions
Height 900 mm
Width 595 mm
Depth 600 mm
Grill capacity 33 l
Main oven capacity 77 l
Location of the appliance
You can fit your freestanding appliance with cabinets on
one or both sides and in the corner.
Do not install the appliance in a bed-sitting room of vol-
ume less than 20 m³ or in a bathroom, shower room or
garage.
Warning! Do not install the appliance below ground
level, for example in a basement, or aboard a boat,
yacht or other vessel.
For the minimal distances of fitting check the table.
17
www.zanussi.com