User manual

Dimension mm
A 650
B 150
C 2
D 400
E 450
F less than 400
Levelling
Use small feet on the bottom of appliance to
set same level of cooker top surface with other
surfaces
The stability chain
Caution! You must install the stability
chain. If you do not install it the appliance
can tilt.
Before you install stability chain, adjust the
appliance to the correct height.
Measure down 180 mm from the appliance top
surface, then measure right 30 mm (See pic-
ture). Mark the position of the wall and this
gives anchor point for the stability chain.
30 mm
180 mm
Warning! These instructions are only valid
in the countries whose symbols appear on
this booklet's cover.
Gas Category I2H
Gas Supply G20 - 20 mbar
Gas burners
BURNER NORMAL POWER NATURAL GAS
kW inj. 100/mm Btu/h
Auxiliary burner 1,0 70 3412
Semi-rapid burner 2,0 96 6483
Rapid burner 2,9 119 10236
Grill 2,7 120 9212
Main Oven 1,9 99 6483
Gas Connection
Use a flexible pipe in compliance with the regu-
lation in force. Be careful they do not come in
touch with mobile parts or they are not
squeezed.
Warning! Only a qualified and competent
person must do the gas installation.
Warning! Before gas connection
disconnect the mains plug from the
mains socket or switch off the fuse in the
fuse box. Close the primary valve of the
gas supply.
19
www.zanussi.com