COFFEE MACHINE ZCOF636X INSTRUCTION BOOK UK
ENGLISH FOR YOUR PERSONAL SAFETY This new appliance is easy to use. However, it is important to read the whole of this booklet before installing or using the appliance for the first time. This will enable you to obtain the best results from the appliance, to avoid incorrect use and to use the appliance safety and with respect for the environment. INSTALLATION AND MAINTENANCE • • • The appliance should be installed and connected to mains by QUALIFIED PERSONNEL only.
INDEX INFORMATION FOR THE USER DESCRIPTION OF THE COFFEE MACHINE PAGE 3 FIRST USE PAGE 4 MAKING COFFEE PAGE 5 HOT WATER PAGE 6 STEAM PAGE 6 RECIPES PAGE 6 CLEANING & MAINTENANCE PAGE 7 FAULTS PAGE 10 TECHNICAL ASSISTANCE AND SPARE PARTS PAGE 10 GUARANTEE CONDITIONS (UK) PAGE 11 GUARANTEE AND SPARE PARTS (ONLY FOR BENELUX) PAGE 12 INFORMATION INSTALLER FOR THE TECHNICAL SPECIFICATIONS PAGE 12 INSTALLATION PAGE 12 WATER SUPPLY PAGE 15 ELECTRICAL CONNECTION PAGE 16 DRAWER PAGE
DESCRIPTION OF THE COFFEE MACHINE 1. Steam knob 2. Grinding texture knob 3. On button 4. Coffee button 5. Hot water button 6. Steam button 7. Light button 8. Orange 'ON' indicator light 9. Red 'water temperature' indicator light 10. Green 'coffee' indicator light 11. Green 'water' indicator light 12. Green 'steam' indicator light 13. Green 'light on' indicator light 14. Green 'dispenser' indicator light 15. Filter holder ring nut 16. Steam spout 17. Coffee press 18. Grinder button 19. Coffee dispenser 20.
FIRST USE • The texture of ground coffee can however be adjusted using the grinding texture knob (ref.2). Turn the knob clockwise for a finer texture and stronger coffee. Turn anticlockwise for a coarser grind and weaker coffee. FILL THE WATER TANK • Water hardness: - • • • • before filling the water tank make sure that the Brita filter is in place (see paragraph "Water supply").
• • light goes out the water has reached the required temperature for coffee making. Close the steam knob by turnig clockwise (ref.1) and release the hot water button (ref.5). Allow any dispensed water to fall into the drip tray or a cup and discard. ACCESSORIES SUPPLIED • • The coffee machine is supplied with a filter holder (ref.20) for one-cup filters (ref.21) and two-cup filters (ref.22). If you are using pods, use the one-cup filter. A scoop (ref.
• • • Once the required quantity of coffee has been supplied, press the coffee button a second time to stop supply. Remove cup(s) from the machine. Take the filter holder off the ring nut and dispose of the used pod. • • Turn the steam knob (ref.1) anti-clockwise. Press the hot water button (ref.5). Release the button when you have the required amount of hot water and close the steam knob (ref.1).
VIENNESE CAPPUCCINO CAPPUCCINO ICE-CREAM This variation is the result of age-old Austrian tradition. Prepare a 'long' espresso by letting the machine run for longer than usual (30-35 seconds), add hot milk followed by whipped cream. Serve in a mediumsized cup (midway between an espresso cup and a cappuccino cup). Decorate with flakes of chocolate. Heat 2 cups of espresso coffee, ¾ cup of single cream and ½ cup sugar in a pan and bring to boiling point.
• Put the filter holder and the filter in the dishwasher every 2 months. WATER TANK • • • • • If left unused for long periods it is advisable to replace the water in the tank with fresh water and to empty the boiler by pressing the coffee button (ref.4) repeatedly. Clean the water tank (ref.27) periodically to remove any lime-scale. The water tank is dish-washer safe. If Brita decalcifying filters are used it is advisable to replace the filter every 2000 espresso coffees or at least every two months.
The plate is located on the external right-hand side of the machine and is clearly visible when the machine is opened. SERVICE AND SPARE PARTS (UK) In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. The addresses are listed on the following pages.
* Appliances found to be in use within a commercial or similar environment, plus those which are the subject to rental agreements. * Products of Zanussi manufacture which are not marketed by Zanussi. EUROPEAN GUARANTEE If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: * The guarantee starts from the date you first purchased your product.
by the manufacturer, at his expense and under his responsibility. 5 All appliances not mentioned under points 3 and 3a, includingappliances having the same functional characteristics but whose transport is easy, must be sent to the Technical Assistance or taken to them. Throughout the period of guarantee the cost of return transportation will be taken care by the manufacturer.
TECHNICAL SPECIFICATIONS • • • • • • • • • • • • • Width Depth Height Tank capacity Net weight Gross weight Power supply voltage Heater power consumption Pump power consumption Light bulb power consumption Total power consumption Working pressure Fuse 594 mm 280 mm 357 mm 2,5 Iitres 17 kg 19 kg 230-240 V 1000 W 50 W 20 W 1070W 12 bar 13 A INSTALLATION INSTALLING IN MODULAR UNITS This appliance must be installed by a competent person.
• - - Warning: Connect the power supply cable of suitable dimensions before securing the power supply unit. Assemble the runners on the sides of the machine (using the screws supplied) as shown in fig.1. Fasten the telescopic runner supports (RH and LH) using three wood screws (fig.2) and taking care to follow the measurements shown in fig.2. Make a slot in the bottom of the open compartment following the measurements given in fig.2.
Fig. 3 Fig. 4 • Fig. 5 Assemble the telescopic runners of the coffee machine in the supports fixed to the inside of the unit; push the runners in until they reach the limit stop and secure the runners (fig.5).
WATER SUPPLY • • • • • • Take the lid off the water tank (ref.27) and take out the Brita filter. Take the filter out of the packaging and soak it in cold water for half an hour before fitting it firmly into the hole in the tank (fig.6). Place the water hose in the relative channel (fig.7) and push it down until it reaches the bottom of the tank (fig.8). Fill the tank with cold water.
ELECTRICAL CONNECTION • • • • Make sure that the electric circuit is suitably earthed. Connect the power cable supplied to the connector on the back of the appliance, plug the connector into the power supply unit on the back of the post (fig.3) where you will find the terminal board (fig.9) set to operate at a supply voltage of 230V monophase. Make sure that a circuit breaker is installed in the electrical circuit of the building to disconnect it from mains and that contacts are at least 3mm apart.
DRAWER The required dimensions of the compartment for installing the machine with the drawer are given in fig. 10 and 11. Fig.10 Fig.
.
From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. 14 billion USD in more than 150 countries around the world.
