User manual

12
ZANUSSI
KUNDENDIENST VERZEICHNIS SCHWEIZ
Zanussi Kundendienstzentrum
Industriestrasse 10
CH- 5506 Mägenwil
Kundendienststellen in Ihrer Nähe
(in jeder Region mit kompetentem Service vertreten)
Erreichbarkeit & Kontakt über ZANUSSI Service Helpline
Tel. [phone]
Adresse für Er
satzteil-Bestellungen
Kundendienstzentrum
Industriestrasse 10
CH-5506 Mägenwil
Tel. [phone]
Tfax 062 889 91 10
Adresse
Verkauf
Zanussi **
Badenerstrasse 587
8048 Zürich
Tel. [phone]
Tfax 01/405 82 35
** eine Abteilung der Electrolux AG
33
Door reversibility
Unplug the appliance from the power supply before
carrying out the below-mentioned operations.
1. Remove the lower hinge (1) and the support foot
(2);
2. Unsrew the front left support foot (3) and screw it
into the corresponding position on the opposite
side;
3. Unscrew the two screws which hide the fixing
holes of the hinge on the left-hand side;
4. Detach the lower door from the middle hinge (H);
5. Remove the middle hinge and detach the upper
door from the pin (G) Unscrew the pin (G) and
screw it into the corresponding position on the
opposite side.
6. After having removed the plugs which must be
refitted on the other side, re-assemble the upper
door, the middle hinge and the lower door.
7. Re-assemble the lower hinge (1) and the support
foot (2) on the opposite side.
To line up the doors, it is possible to adjust the
middle hinge (H) horizontally by means of a tool,
after slackening the two screws (see figure).
Warning:
After having reversed the opening direction of
the doors check that all the screws are properly
tightened and that the magnetic seal adheres to
the cabinet. If the ambient temperature is cold
(i.e. in Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
G
H
I
I
I
D715 PIED/M
1
2
3