User manual

Indicator lights
End of programme The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• Activation/deactivation of the rinse aid dispenser.
• An alarm if the appliance has a malfunction.
Multitab The indicator light shows the activation/deactivation of
the multitab function. Refer to the chapter 'Multitab func-
tion'.
Salt
1)
The indicator light comes on when it is necessary to fill
the salt container. Refer to the chapter 'Use of dishwasher
salt'.
After you fill the container, the salt indicator light can
continue to stay on for some hours. This does not have
an unwanted effect on the operation of the appliance.
Rinse aid
1)
The indicator light comes on when it is necessary to fill
the rinse aid. Refer to the chapter 'Use of rinse aid'.
1) When the salt and/or rinse aid containers are empty, the related indicator lights do not come on while a washing programme
operates.
Programme selection buttons
With these buttons you can select the washing pro-
gramme. Press a programme button, the related indicator
light comes on. Refer to 'Washing programmes' chapter
for more data about the washing programmes.
Delay start button
Use the delay start button to delay the start of the washing
programme with an interval of 3 or 6 hours. Refer to the
chapter 'Setting and starting a washing programme'.
Function buttons
Use the function buttons for these operations:
• To set the water softener. Refer to the chapter 'Setting
the water softener'.
• To cancel the washing programme in progress or a
delay start in progress. Refer to the chapter 'Setting
and starting a washing programme'.
• To activate/deactivate the multitab function. Refer to
the chapter 'Multitab function'.
• To deactivate/activate the rinse aid dispenser, when
multitab function is active. Refer to the chapter 'Mul-
titab function'.
Setting mode
The appliance is in setting mode when all the programme
indicator lights are on.
The appliance must be in setting mode for these opera-
tions:
– To set a washing programme.
– To set the water softener level.
– To deactivate/activate the rinse aid dispenser.
The appliance is not in setting mode If only one pro-
gramme indicator light is on. Cancel the programme to
go back to the setting mode. Refer to the chapter 'Setting
and starting a washing programme'.
20