EN User manual Dishwasher ZDT12041FA
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Options _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 4 4 5 7 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Technical information _ _ _ _ _ _ _ _ _ _ _ 12 Environment concer
• Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. Use • This appliance is intended to be used in household and similar applications such as: – Staff kitchen areas in shops, offices and other working environments – Farm houses – By clients in hotels, motels and other residential type environments – Bed and breakfast type environments.
Indicators Description Salt indicator. This indicator is off while the programme operates. Washing phase indicator. End indicator. Programmes Programme 1) 2) 3) Degree of soil Type of load Programme phases Duration (min) Energy (kWh) Water (l) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry 130 - 150 1.3 - 1.4 13 - 15 Normal soil Crockery and cutlery Prewash Wash 65 °C Rinses Dry 100 - 110 1.2 - 1.
Set this option when you want to wash a small quantity of tableware and cookware. This option decreases the programme duration and the consumption of energy and water. Load the upper basket and the lower basket and decrease the quantity of detergent. This option is not applicable to and . Acoustic signals The acoustic signals operate when the appliance has a malfunction and it is not possible to deactivate them. There is also an acoustic signal that operates when the programme is completed.
Adjusting the water softener Water softener adjustment Water hardness German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Level 47 - 50 84 - 90 8.4. - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - 39 3.3 - 3.9 23 - 27 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 3 4 - 10 7 - 18 0.7 - 1.
3 1 4 1 2 A 2 3 4 4 3 Put 1 litre of water in the salt container (only for the first time). Filling the rinse aid dispenser Fill the rinse aid dispenser when the lens (A) is clear. To adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). 2 1 1 2 Daily use 1. Open the water tap. 2. Press the on/off button to activate the appliance. • If the salt indicator is on, fill the salt container. 3. Load the baskets. 4.
A 30 To set the appliance in user mode, do the Reset function 1. Press and hold the programme button until all the programme indicators come on. B 30 20 3 20 4 Put the detergent or the tablet in compartment (A) If the programme has a prewash phase, put a small quantity of detergent in compartment (B). Using the combi detergent tablets When you use tablets, that contain salt and rinse aid, do not fill the salt container and the rinse aid dispenser.
Hints and tips The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. It is important to set the right level of the water softener. This makes sure that the water softener uses the correct quantity of dishwasher salt and water.
Cleaning the filters To remove filters (B) and (C), turn the handle counterclockwise and remove. Pull apart filter (B) and (C). Wash the filters with water. Remove filter (A). Wash the filter with water. Before you put the filter (A) back, make sure that there are no residues of food or soil in or around the edge of the sump. Make sure that filter (A) is correctly positioned under the 2 guides (D). Assemble filters (B) and (C). Put them back in filter (A). Turn the handle clockwise until it locks.
Alarm code Problem • The end indicator flashes 1 time intermittently. • Acoustic signal sounds 1 time intermittently. The appliance does not fill with water. • The end indicator flashes 2 times intermittently. • Acoustic signal sounds 2 times intermittently. The appliance does not drain the water. • The end indicator flashes 3 times intermittently. • Acoustic signal sounds 3 times intermittently. The anti-flood device is on. Warning! Deactivate the appliance before you do the checks.
Technical information Dimensions Width / Height / Depth (mm) Electrical connection Refer to the rating plate. Voltage 596 / 818 - 898 / 555 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) Water supply 1) Cold water or hot water2) (0.5 / 0.05 ) / (8 / 0.8 ) Capacity Place settings 12 Power consumption Left-on mode 0.50 W Off-mode 0.50 W max. 60 °C 1) Connect the water inlet hose to a water tap with a 3/4'' thread.
www.zanussi.
www.zanussi.
www.zanussi.
156974790-A-362013 www.zanussi.
