User manual

ADDING DETERGENT
2
1
2
0
3
0
A
B
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
2
1
2
0
3
0
• Do not fill the salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest level.
• Set the rinse aid dispenser to the lowest position.
SETTING AND STARTING A PROGRAMME
The AUTO OFF function
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has not
started.
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in
programme selection mode.
3. Press the button related to the programme you
want to start.
The related programme indicator comes on.
4. Close the appliance door to start the
programme.
Starting a programme with delay start
1. Set a programme.
2. Press
again and again until the indicator
related to the number of hours want to set
comes on (3, 6 or 9).
The delay indicator comes on.
3. Close the appliance door to start the
countdown.
While a countdown is running it is possible to
increase the delay time but not to change the
selection of the programme.
When the countdown is completed, the programme
starts.
Opening the door while the appliance
operates
If you open the door while a programme is running,
the appliance stops. When you close the door, the
appliance continues from the point of interruption.
Cancelling the delay start while the
countdown operates
When you cancel the delay start you have to set the
programme and options again.
Press and hold simultaneously and until
the appliance is in programme selection mode.
8