User manual

CANCEL FUNCTION

Press and hold simultaneously and until the appliance is in programme selection mode.

With this function you can cancel the running programme or the delay start.

USER MODE

While the appliance is in programme selection mode:

1. Press and hold and .

• The indicators , and starts to flash.

In user mode can be changed:

• The level of the water softener according to the water hardness.

• The activation or the deactivation of the acoustic signal for end of programme.

These settings will be saved until you change them again.

ADJUSTING THE WATER SOFTENER

While the appliance is in user mode:

1. Press .

• The indicators and goes off.

• The indicator starts to flash.

• The current setting is indicated by the number of flashes of the indicator (e.g. 5 flashes +

pause + 5 flashes = level 5).

2. Press to change the setting. Each time you press , the level increases. After level

10 you will start again from level by 1.