EN User manual Hob ZEI3921
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 5 5 5 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Environment concerns _ _ _ _ _ _ _ _ _ _ _ 11 Subject
• Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces. • Do not use a steam cleaner to clean the appliance. • Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot.
• The electrical installation must have an isolation device which lets you disconnect the appliance from the mains at all poles. The isolation device must have a contact opening width of minimum 3 mm. • Use only correct isolation devices: line protecting cut-outs, fuses (screw type fuses removed from the holder), earth leakage trips and contactors. Use Warning! Risk of injury, burns or electric shock. • Use this appliance in a household environment. • Do not change the specification of this appliance.
• Cut off the mains cable and discard it. Product description Cooking surface layout 180 mm 1 140 mm 2 3 1 Cooking zone 1800 W 2 Cooking zone 1400 W 3 Power indicator 4 Control knobs 4 Electric cooking zones control knobs Symbol Function minimum heat maximum heat Symbol Function 1 0 off position 9 Daily use Warning! Refer to the Safety chapters. To switch on and increase the heat setting turn the knob clockwise. To decrease the heat setting turn the knob counter-clockwise.
Cookware is correct for an induction hob if … • ... some water boils very quickly on a zone set to the highest heat setting • ... a magnet pulls on to the bottom of the cookware. Cooking zone Minimum diameter of cookware Front 120 mm Rear 145 mm Energy saving The bottom of the cookware must be as thick and flat as possible. Cookware dimensions: induction cooking zones adapt to the dimension of the bottom of the cookware automatically to some limit.
The noises are normal and do not refer to any defects. Information on acrylamides which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. Important! According to the newest scientific knowledge, if you brown food (specially the one Care and cleaning Warning! Refer to the Safety chapters. 2. Clean the appliance after each use. Always use cookware with clean bottom. 3.
Problem Possible cause and remedy Results of plate are not satisfactory. • • • • Make sure that plate is clean and dry. Make sure that the cooking pan is the correct size for the plate. Make sure that cooking pan has a flat bottom. Make sure that the setting is correct for type of cooking. Acoustic warning (double acoustic signal) sounds. • • • • The pot is not suitable. Use suitable cookware. No cookware on the plate. Place cookware on the plate.
Installation Warning! Refer to the Safety chapters. Installation Warning! Read and follow the instructions carefully. There is a risk of injury or damage to the appliance. • Make sure that there is no damage to the appliance from the transportation. Do not connect a damaged appliance. Speak to the supplier if necessary. • Install built-in appliances only after you assemble the appliance into correct built-in units and work surfaces. Make sure that built-in units and surfaces obey the standards.
3. Connect the brown (live) wire to the terminal which is marked with the letter 'L' and is always connected to the network phase. The relevant installation instructions are supplied within the kit package. There must be no cut or stray strands of wire present. The cord clamp must be correctly attached to the outer sheath. To replace the connection cable use only H05V2V2-F T90 or equivalent type. Make sure that the cable section is applicable to the voltage load and the working temperature.
with vents to let a continuous supply of air. The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit.
397297701-B-342012 www.zanussi.