EN User manual Hob ZEI6640XBA
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Technical information _ _ _ _ _ _ _ _ _ _ _ _ Environment concerns _ _ _ _ _ _ _ _ _ _ _ GREAT BRITAIN & IREL
• Do not operate the appliance by means of an external timer or separate remote-control system. • Unattended cooking on a hob with fat or oil can be dangerous and may result in fire. • Never try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket. • Do not store items on the cooking surfaces. • Do not use a steam cleaner to clean the appliance.
• Use the correct electricity mains cable. • Do not let the electricity mains cable tangle. • Make sure the mains cable or plug (if applicable) does not touch the hot appliance or hot cookware, when you connect the appliance to the near sockets • Make sure the appliance is installed correctly. Loose and incorrect electricity mains cable or plug (if applicable) can make the terminal become too hot. • Make sure that a shock protection is installed. • Use the strain relief clamp on cable.
• Clean regularly the appliance to prevent the deterioration of the surface material. • Do not use water spray and steam to clean the appliance. • Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. Warning! Risk of injury or suffocation. • Contact your municipal authority for information on how to discard the appliance correctly. • Disconnect the appliance from the mains supply.
Sensor field Function 2 To lock / unlock the control panel. 3 To activate the Power function. 4 A heat setting display. To show the heat setting. 5 Timer indicators of cooking zone. To show for which zone you set the time. 6 The timer display. To show the time in minutes. 7 / To increase or decrease the heat setting. 8 / To increase or decrease the time. To select a cooking zone. 9 Heat setting displays Display Description The cooking zone is deactivated.
• The appliance becomes too hot (e.g. when, a saucepan boils dry). Before you use the appliance again, the cooking zone must be cool. • You use incorrect cookware. The symbol comes on and the cooking zone deactivates automatically after 2 minutes. • You do not deactivate a cooking zone or change the heat setting. After some time comes on and the appliance deactivates. See below.
Timer Count Down Timer Use the Count Down Timer to set how long the cooking zone operates for only this one time. Set the Timer after the selection of the cooking zone. You can set the heat setting before or after you set the timer. • To set the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. • To activate or change the Timer: touch or of the timer to set the time ( 00 99 minutes).
Cookware for induction cooking zones Important! Use the induction cooking zones with correct cookware. Cookware material • correct: cast iron, steel, enamelled steel, stainless steel, the bottom made of multi-layer (with correct mark from a manufacturer). • not correct: aluminium, copper, brass, glass, ceramic, porcelain. Cookware is correct for an induction hob if … • ... some water boils very quickly on a zone set to the highest heat setting. • ... a magnet pulls on to the bottom of the cookware.
Hea t setting Use to: Time Hints Nominal power consumption 2-3 Simmer rice and milkbased dishes, heating up readycooked meals 25 - 50 min Add the minimum twice as much liquid as rice, mix milk dishes part procedure through 5 – 10 % 3-4 Steam vegetables, fish, meat 20 - 45 min Add some tablespoons of liquid 10 – 15 % 4-5 Steam potatoes 20 - 60 min Use max.
Problem Possible cause Remedy There is water or fat stains on the control panel. Clean the control panel. An acoustic signal sounds and the appliance deactivates. An acoustic signal sounds when the appliance is deactivated. You put something on one or more sensor fields. Remove the object from the sensor fields. The appliance deactivates. You put something on the sensor field . Remove the object from the sensor field. The residual heat indicator does not come on.
Make sure, you operated the appliance correctly. If not the servicing by a customer service technician or dealer will not be free of charge, also during the warranty period. The instructions about the customer service and conditions of guarantee are in the guarantee booklet. Installation Warning! Refer to the Safety chapters. Before the installation Before the installation of the appliance, record the information below from the rating plate. The rating plate is on the bottom of the appliance casing.
B A min. 2 mm B A min. 2 mm > 20 mm < 20 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min 30 mm min. 500 mm B A 12 mm 57 mm 28 mm 41 mm 38 mm 31 mm min. 12 mm R 5mm min. 55mm min. 2 mm 490+1mm 560+1mm www.zanussi.
min. 38 mm min. 2 mm If you use a protection box (an additional accessory1)), the front airflow space of 2 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. 1) The protection box accessory may not be available in some countries. Please contact your local supplier. Technical information Modell ZEI6640XBA Prod.Nr.
Cooking zone Nominal Power (Max heat setting) [W] Right rear — 180 mm 1800 W Right front — 145 mm 1400 W Left rear — 180 mm 1800 W Left front — 210 mm 2300 W Power Function activated [W] Power function maximum duration [min] Minimum cookware diameter [mm] 145 2500 W 4 125 145 3700 W The power of the cooking zones can be different in some small range from the data in the ta- 10 180 ble. It changes with the material and dimensions of the cookware.
• Costs for calls to put right appliance which is improperly installed, calls to appliances outside United Kingdom. • Appliances found to be in use within a commercial environment, plus those which are subject to rental agreements. • Products of Electrolux manufacturer that are not marketed by Electrolux Service and Spare Parts.Please contact your local Service Force Centre: 08445 616 616(Call will be routed to Service Force Centre covering your postcode area).
www.electrolux.com Albania +355 4 261 450 Rruga “Kavajës”, ish-parku autobuzëve, Tiranë Belgique/België/Belgien +32 2 7162444 Raketstraat 40, 1130 Brussel/Bruxelles Česká Republika +420 261 302 261 Budějovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Strevelinsvej 38-40, 7000 Fredericia Deutschland +49 180 32 26 622 Fürther Str. 246, 90429 Nürnberg Eesti +37 2 66 50 030 Pärnu mnt. 153, 11624 Tallinn España +34 902 11 63 88 Carretera M-300, Km.
Türkiye +90 21 22 93 10 25 Tarlabaşı caddesi no : 35 Taksim İstanbul Россия 8-800-200-3589 129090 Москва, Олимпийский проспект, 16, БЦ "Олимпик" Україна +380 44 586 20 60 04074 Київ, вул.Автозаводська, 2а, БЦ "Алкон" 18 www.zanussi.
www.zanussi.
892955934-A-472012 www.zanussi.
