EN User manual Induction Hob ZEI6640XBA
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operating instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 3 5 7 Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12 Subject to change without notice Safety information
Installation instructions Before the installation, note down the serial number (Ser. Nr.) from the rating plate.The rating plate of the appliance is on its lower casing. ZEI6640XBA 58 GAD D5 AU 220-240 V 50-60 Hz 949 595 535 00 Induction 7,4 kW 7,4 kW ZANUSSI The Safety Instructions Warning! You must read these! • Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier.
Assembly min. 500mm min. 50mm min. 50mm min.
min. 25 mm min. 38 mm min. 5 mm min. 20 mm min. 5 mm If you use a protection box (the additional accessory1)), the front airflow space of 5 mm and protective floor directly below the appliance are not necessary. You can not use the protection box if you install the appliance above an oven. Product description General overview 1 2 180 180 mm 210 mm 5 mm 145 mm 4 3 1 Induction cooking zone 1800 W (minimum cookware diameter =145 mm).
Control panel layout 1 2 3 4 5 9 6 7 8 Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor field Function 1 It activates and deactivates the appliance. 2 It locks and unlocks the control panel. It activates the Power function. 3 4 Heat setting display It shows the heat setting. 5 Timer indicators for the cooking zones It shows for which zone you set the time. 6 Timer display It shows the time in minutes.
Display Description The Power function operates. The Automatic Switch-Off operates. Residual heat indicator Warning! The induction cooking zones make the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is hot from the heat of the cookware. The risk of burns from residual heat! Operating instructions Activation and deactivation Touch ance. The sound operates some time and the appliance deactivates. Remove the object or clean the control panel.
Automatic Heat Up Power management 11 10 9 8 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 8 9 You can get the necessary heat setting in a shorter time if you activate the Automatic Heat Up function. This function sets the highest heat setting for some time (see the graphic), and then decreases to the necessary heat setting. To start the Automatic Heat Up function: 1. Touch . comes on in the display. 2. Touch display. again and again until comes on in the 3.
Lock When the cooking zones operate, you can lock the control panel, but not . It prevents an accidental change of the heat setting. First set the heat setting. To start this function touch . The symbol comes on for 4 seconds. The Timer stays on. . The heat setting that you To stop this function touch set before comes on. When you stop the appliance, you also stop this function. The child safety device This function prevents an accidental operation of the appliance.
Heat setting Use to: Time Hints Keep warm the food you cooked as required Put a lid on a cookware 1-2 Hollandaise sauce, melt: butter, chocolate, gelatine 5-25 min Mix from time to time 1-2 Solidify: fluffy omelettes, baked eggs 10-40 min Cook with a lid on 2-3 Simmer rice and milkbased dishes, heating up ready-cooked meals 25-50 min Add the minimum twice as much liquid as rice, mix milk dishes part procedure through 3-4 Steam vegetables, fish, meat 20-45 min Add some tablespoons of liqui
What to do if… Problem Possible cause and remedy You cannot activate the appliance or operate it. • Activate the appliance again and set the heat setting in 10 seconds. • You touched 2 or more sensor fields at the same time. Only touch one sensor field. • The Child Safety Device or the Lock operates. See the chapter Operating instructions. • There is water or fat stains on the control panel. Clean the control panel. A Sound operates and the appliance deactivates.
If you tried the above solutions and cannot repair the problem, speak to your dealer or the customer service. Give the data from the rating plate, three digit letter code for the glass ceramic (it is in the corner of the glass surface) and an error message that comes on. Make sure, you operated the appliance correctly. If not the servicing by a customer service technician or dealer will not be free of charge, also during the warranty period.
892947624-B-072012 www.zanussi.
