Operating instructions
Code Setup Options:
Pressing OK at CODE SETUP presents 4 options for programming a Mode
with codes.
Programming by using the on-screen Code List
a. Turn on the device to be controlled.
b.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. “CODELISTE AUFR” is displayed.
e. Press and release OK key. “QUELLENTASTE“ is displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). “GERAET? TV” is displayed.
g. Using the Up/Down keys, select the Device type to be programmed (TV, VCR, DVD, etc. –
see “GERAET?” note below). Press and release the OK key to confirm selection.
h. The first Code List Brand and Code will now be displayed (e.g. Admiral 0000). Use Up/Down
keys to select the Brand and Left/Right keys to select the code. Codes can be functionally
tested on the target Device using the Digit 0-9, Volume, Mute, Channel, Power, AV, Teletext,
Play, Stop, FF, Rewind and Pause keys. Once the correct code has been found, press and
release Okay key to install the Code.
i. “WARTEN…” followed by “FERTIG” will be displayed and the remote will exit Setup and return
to normal operation.
Programming by entering the code
The 4 digit code for your brand can be found in the separate code list.
a. Turn on the device to be controlled.
b.
Press and hold Setup key until “CODE SETUP” is displayed (takes approximately 2-3 seconds).
c. Release Setup key.
d. Press and release OK key. “CODELISTE AUFR.” is displayed.
e. Navigate to “CODE EING.”. Press and release the OK key. “QUELLEN-TASTE” is displayed.
f. Press and release desired Mode key (TV, VCR, DVD, etc.). The Mode key is displayed along
with its currently programmed code.
g. Enter the 4-digit code number using the digit 0-9 keys.
h. On the 4th digit entry, “FERTIG” will be displayed and the remote will exit Setup and return to
normal operation.
If an invalid code is entered, “Code Error” will be shown in the
Falscher Set
display and the remote will exit Setup and return to normal operation. Code
17
COde- Set
Setup
왘
Codeliste Set
Aufr.
왘
Quellen- Set
Taste
왘
Geraet? Set
TV
왘
Warten..
…Set
왘
Admiral Set
00:00
왘
Warten
..
Set
왘
Fertig Set
왖
왔
Code Set
Eing.
왘
Quellen- Set
Taste
왘
DVD Set
Code 0768
왘
Fertig Set
왖
왔
Code Set
Such.
왘
Quellen- Set
Taste
왘
Geraet? Set
TV
왘
Funktion Set
Test.
왘
Suchen… Set
TV
왘
Fertig Set
왖
왔
Herstel.- Set
Codes
왘
Quellen- Set
Taste
왘
Geraet? Set
TV
왘
Herstel. Set
Code?
왘
Funktion Set
Test.
왘
Suchen
..
Set
TV
왘
Fertig Set
55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:32 Seite 17