Operating instructions

Code Identification
Press the respective Mode key in normal operation to display
DVD
programmed code for that Mode (e.g. “DVD Code 0768”). CoDe 0768
Programming Combo Device Codes
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc) will require you to set up two
different Mode keys to control both parts of the Combo device. For example, if you have a
TV/DVD Combo, you might need to set up one code under the TV key to control the TV part
AND a separate code (under any other Mode key) to control the DVD part.
Controlling Combo Devices
Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc) have separate keys on the original
remote to select the part of the Combo device to be controlled. For example, if your Combo
device is a DVD/VCR then its original remote may have separate DVD and VCR keys for selection
of the Combo part you would control. The equivalent key functions can be found on your remote
by using the Mode and Setup keys. Assuming the DVD/VCR Combo device is the example and its
code is programmed under DVD Mode, press and hold the DVD Mode key for more than one
second to send the DVD key command. To send the VCR key command, quickly press and
release the Setup key followed by pressing and releasing the DVD Mode key. This method can be
applied similarly to all Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc) and is available for
all Modes. This feature is not supported by all codes.
System Setup Options: Pressing OK key at SYSTEM SETUP accesses the System Setup
Options for Volume Punch-Through control Setup, Time Setup, Date Setup, Backlight Setup and
System Reset.
Volume/Mute Control and Punch-Through Feature
This remote allows you to select which Mode controls your Volume/Mute keys. The remote is
initially set (factory default) for all Modes programmed with “Visual” codes (e.g. TV, VCR, DVD,
PVR, SAT & CABLE) and “Audio” codes (e.g. CD & AUDIO) to use their own Volume/Mute control
if present. If the programmed “Visual” code has no Volume/Mute operation of its own then those
keys will punch-through control to the TV Mode device without needing to change to TV Mode.
Any Mode chosen for Volume/Mute control MUST have its own Volume/Mute function either in the
programmed code or learned otherwise the Volume/Mute keys will do nothing.
System- Set
Setup
왘
Vol/Mute Set
Setup
왘
Vol/Mute Set
alle
왘
Welcher Set
Mod.?
왘
Warten.. Set
왘
Fertig Set
왖 왖
왔
Vol/Mute Set
Einz.
왘
Welcher Set
Mod.?
왘
Warten.. Set
왘
Fertig Set
Vol/Mute Set
Reset
왘
BeStaet.Set
Reset
왘
Warten.. Set
왘
Fertig Set
왔
Zeit- Set
Setup
왘
Zeit? Set
24HR 23;58
왘
Fertig Set
왖
왔
Datums- Set
Setup
왘
Jahr? Set
2009
왘
Monat? Set
10
왘
Datum? Set
9
왘
Tag? Set
Mo
왘
Fertig Set
왖
왔
Beleucht. Set
Setup
왘
Bel.-Zeit Set
Sek. 20
왘
Fertig Set
왖
왔
Geraete- Set
Reset
왘
Bestaet. Set
Reset
왘
Warten.. Set
19

55415 BedienAnltg TeFu_Zweite Version 08.12.09 16:33 Seite 19