TABLE DE CUISSON GASKOOKPLAAT GASKOCHMULDE GAS HOB ZGF 643 NOTICE D'UTILISATION GEBRUIKSAANWIJZING GEBRAUCHSANLEITUNG INSTRUCTION BOOKLET BE
ENGLISH ☛ For Your Safety These warnings are provided in the interest of safety. You installing or using the appliance. MUST read them carefully before It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred, always ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings.
Contents 1. Instruction for the User ............. Pag. 34 5. Electrical Connection ................ Pag. 37 2. Cleaning and Maintenance ....... Pag. 35 6. Adaptation to different types of gas................................ Pag. 38 3. Technical Data ........................... Pag. 36 7. Building In .................................. Pag. 39 4. Instruction for the Installer ....... Pag. 36 Guarantee ................................... Pag. 42 1.
THE HOB LID In order to make the appliance match with the kitchen design, a lid (not provided) can be fitted on the hob. ● Always clean the lid from cooking residues before opening it or taking it off. ● The lid is meant to avoid dust to settle on the hob, when it is closed, and to collect splashes of oil or fat, when it is open. Do not use it for any other purpose. ● WARNING! The crystal lid can splinter when overheated. Always ensure all the burners are off before closing it.
3. Technical Data Gas Burners Rating Rapid Burner (big) 3 kW (G20) - 2,8 kW (G30-31) Auxiliary Burner (small) 1 kW Semirapid Burner (medium) Class 3 Appliance Category 2 kW Electric Supply 230 V 50 Hz HOB RECESS DIMENSIONS II 2E+3+ Setting Natural Gas 20 mbar / G25 25 mbar Gas connection G 1/2" Length 560 mm. Width 480 mm. 4. Instruction for the Installer ● The side walls of the unit in which the hob is going to be installed, must not exceed the height of the working top.
5. Electrical Connection The appliance is designed to be connected to 230 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force.
6. Adaptation to different types of gas INJECTORS REPLACEMENT • Remove the pan supports. • Remove the burner's caps and crowns. • With a socket spanner 7 unscrew and remove the injectors (Fig. 7), and replace them with the ones required for the type of gas in use (see table 2). • Reassemble the parts, following the same procedure backwards. • Replace the rating label (placed near the gas supply pipe) with the relevant one for the new type of gas supply.
7. Building In A = Auxiliary burner R = Rapid Burner SR SR = Semirapid burner A SR These hobs can be inserted in a built-in kitchen unit whose depth is between 550 and 600 mm. The hobs dimensions are shown in Fig. 9. R 58 0 0 51 Fig. 9 FITTING THE LID We recommend the lid hinge block are fitted before installing the hob into the worktop. To install the lid onto the hob, proceed as follows: a.
55 m in . INSTALLATION AND ASSEMBLY 480 These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig. 13. The edge of the cut out must have a minimum distance from the rear wall of 55 mm. If there are side walls, or sides of the furniture unit near the hob, the cut out edges must have a minimum distance of 100 mm. as shown in Fig. 13.
Fig. 17 Fig. 16 a 60 591 Proper arrangements must be taken in designing the forniture unit, in order to avoid any contact with the bottom of the hob which can be heated when it is operated. The recommended solution is shown in Fig. 16. The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed.
GUARANTEE - SPARE PARTS When calling for repairs during the period of guarantee ofthe appliance, the original invoice or receipt must be shown or sent together with the appliance to be repaired. Extension of the guarantee 7 General conditions of guarantee 1 The manufacturer guarantees the appliance indicated on the relative invoice for a period of one year from the date of purchase.