User manual EN Gas hob ZGF640 IL
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 7 7 8 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
• • • • • • • • • • • • • • • damage to property caused by failure to obey these requirements. To prevent the risks of structural damage or physical injury, installation, connection of the appliance to the power supply and gas system, setting up and maintenance must only be done by qualified personnel in compliance with standards and local regulation force. Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance.
Installation Warning! The following instructions about installation, connection and maintenance must be carried out by qualified personnel in compliance with standards and local regulations in force. Gas Connection Choose fixed connections or use a flexible pipe in stainless steel in compliance with the regulation in force. If you use flexible metallic pipes, be careful they do not come in touch with mobile parts or they are not squeezed. Also be careful when the hob is put together with an oven.
change from liquid gas to natural gas 20 mbar, undo the by-pass screw approximately 1/4 of a turn. 1 1 Minimum adjustment screw 5. Make sure the flame does not go out when you quickly turn the knob from the maximum position to the minimum position. Electrical connection • Ground the appliance according to safety precautions. • Make sure that the rated voltage and type of power on the rating plate agree with the voltage and the power of the local power supply.
A a) Removable panel b) Space for connections Kitchen unit with oven The hob recess dimensions must obey the indication and the kitchen unit must be equipped with vents to let a continuous supply of air. The electrical connection of the hob and the oven must be installed separately for safety reasons and to let easy remove oven from the unit.
Product description Cooking surface layout 1 2 3 1 2 3 4 5 5 Cooktop Semi-rapid burner Rapid burner Auxiliary burner Control knobs 4 Control knobs Symbol Symbol Description ignition position / maximum gas supply Description no gas supply / off position minimum gas supply Operation Ignition of the burner Warning! Be very careful when you use open fire in kitchen environment. Manufacturer decline any responsibility in case misuse of the flame 1 2 Always light the burner before you put cookware.
Important! In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it counter-clockwise to maximum gas release position. If the burner accidentally goes out, turn the control knob to the off position and try to light the burner again after minimum 1 minute. Turning the burner off To put the flame out, turn the knob to the symbol .
• To make burners work correctly, make sure that the arms of the pan supports are in the centre of the burner. • Be very careful when you replace the pan supports to prevent the hob top from damage. After cleaning, dry the appliance with a soft cloth. Removing the dirt: 1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. – Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations.
If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, speak your dealer or the local Service Force Centre. neer, the visit from the customer service technician or dealer may not take place free of charge, even during the warranty period.
By-pass diameters Burner Ø By-pass in 1/100 mm Burner Ø By-pass in 1/100 mm Semi-rapid 35 Auxiliary 28 Rapid 45 Gas burners BURNER NORMAL POWER NORMAL POWER LPG (Butane/Propane) G30/G31 30 mbar kW kcal/h inj. 1/100 mm g/h Auxiliary burner 0.95 813 50 75 Semi-rapid burner 1.6 1369 66 126 Rapid burner 2.45 2096 77 193 Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
397170302-A-372010 www.zanussi.
