User manual

17
Building In
This hob can be inserted in a built-in
kitchen unit whose depth is between
550 and 600 mm. The hobs dimensions
are shown in Fig. 4.
The edge of the cut out must have a
minimum distance from the rear wall of
55 mm.
If there are side walls, or sides of the
furniture unit near the hob, the cut out
edges must have a minimum distance of
100 mm.
Hanging forniture units or hoods
must be placed at 650 mm. minimum
from the hob.
Fitting the hob to the worktop
The hobs can be installed in a
kitchen unit with an opening for insertion
whose dimensions are shown in Fig. 5.
To install the hob, proceed as follows:
1) Remove the pan supports, the
burners caps and crowns and turn
the hob upside down, taking care
the ignition candles are not
damaged in this operation.
A = Auxiliary burner
SR= Semi-rapid burner
R = Rapid burner
Fig. 5
Dimensions are given in millimeters
SR
SR
A
R
500
580
Fig. 4