User manual

Clearance Height
A minimum clearance height of 650mm
(25
1
/
2
”) is required when installed above a
built-in electric hob, or 700mm (27
1
/
2
”) when
installed above a built-in gas hob.
A minimum clearance height of 685mm (27”)
is required when installed above a slot-in
electric cooker, or 787mm (30
1
/
2
”) when
installed above a slot-in gas cooker.
When installed between adjoining wall
cabinets, the wall cabinets must not overhang
the hob and the distance between the
underside of the cabinet and the worktop must
be 450mm. If the height of the wall cabinet is
less than 450mm, a gap of 50mm must be
maintained either side of the hob.
This cooker hood must not be installed
above a cooking appliance with a high
level grill.
Unpacking
The fittings supplied to install this cooker
hood can be found with the instruction book
inside the packaging.
2 - Wall fixing brackets
4 - Rawl plugs
4 - Fixing screws
6 - Decor panel fixing screws
4 - Security fixing screws
K
Fitting the Wall Brackets
1. Use the paper template provided to mark
the hole positions on the wall for the
bracket fixing screws.
2. Check the hole distances are correct with
a tape measure as stated on the
template.
3. At this stage it is important to allow 15mm
(
1
/
2
”) clear space above the cooker hood
to enable it to be hooked onto the
brackets and for subsequent removal for
decorating or servicing.
12
A: Built-in Electric Hob: 650mm minimum clearance
B: Built-in Gas hob: 700mm minimum clearance
C: Slot-in Electric Cooker: 685mm minimum clearance
D: Slot-in Gas Cooker: 787mm minimum clearance
Hob