User Manual Bedienungsanleitung Manual de Instruções Manuel d’Instructions Model ZHP6022 ZHP9022 Gebruiksaanwijzing Manual de instrucciones
INDEX RECOMMENDATIONS AND SUGGESTIONS...................................................................................................................... 3 CHARACTERISTICS............................................................................................................................................................. 4 INSTALLATION.....................................................................................................................................................................
RECOMMENDATIONS AND SUGGESTIONS The Instructions for Use apply to several versions of this appliance. Accordingly, you may find descriptions of individual features that do not apply to your specific appliance. INSTALLATION • The manufacturer will not be held liable for any damages resulting from incorrect or improper installation.
ChARACTERiSTICS Dimensions ���� ���� ����� ����� GB 4
Components Ref. Q.ty 1 1 Product Components Hood Body, complete with: Controls, Light, Blower, Filters Directional Air Outlet grille Flange ø 120 mm Closing element 8 10a 20 1 1 1 Ref. 12a 12e 12f Q.ty 4 2 3 Installation Components Screws 3,5 x 16 Screws 2,9 x 12,7 Screws 2,9 x 9,5 Q.
INSTALLATION Drilling the Support surface and Fitting the Hood • The Hood can be fitted directly on the lower surface of the Wall Units (650 mm min. above the Cooker Top) using the snap-on Side Supports. • Make an opening on the lower surface of the Wall Unit, as indicated. (fig.1) • Choose the correct flange measure basing on the air outlet diameter and insert it to the upper air outlet opening. (fig.2) • Screw the closing profile 20 onto the rear part of the hood, using the screws 12f (2.9 x 9.
Connections Ducting Version AirExhaust System When installing the hood in ducting version, a rigid or a flexible pipe with the diameter corresponding to the flange diameter is used in order to connect the hood to the air outlet piping. • Fix the pipe with an adequate quantity of pipe clamps (not supplied). • Remove possible charcoal filters. 12e Recirculation Version AireOutlet 8 • Cut a hole ø 125 mm in any shelf that may be positioned over the hood. • Insert the flange 10a on the hood body outlet.
USE Tablero de mandos By pulling out the sliding panel it is possible to automatically activate all the hood functions. By simply closing the sliding panel all the functions are switched off L M SWITCH FUNCTIONS L Light Switches the lighting system on and off M Motor Switches the extractor motor on and off 1. Low speed, used for a continuous and silent air change in the presence of light cooking vapour. 2.
MAiNTENaNce Grease filters CLEANING METAL CASSETTE GREASE FILTERS • The filters must be cleaned every 2 months, or more frequently in case of particularly heavy use of the hood. Filters can be washed in a dishwasher. • Pull out the sliding suction panel. • Remove the filters one by one, after having disconnected the relative fastening elements. • Wash the filters, taking care not to bend them. Let them get dry before refitting them.
