User manual

19
Regulation and Control
TTeemmppeerraattuurree RReegguullaattoorr ffoorr RReeffrriiggee--rraattoorr::
«A»
Allows to adjust the temperature inside the refrige-
rator according to use and external conditions.
• Pos. G = Minimum cold.
• Pos. G = Maximum cold.
• Pos. H = Motor disconnected.
TTeemmppeerraattuurree RReegguullaattoorr ffoorr FFrreeeezzeerr::
«C»
Allows to adjust the temperature inside the freezer
according to use and external conditions.
• Pos. G = Minimum cold.
• Pos. G = Maximum cold.
• Pos. H = Motor disconnected.
GGrreeeenn lliigghhtt::
«D» (some models only).
Indicates connection to mains when lighted.
OOrraannggee lliigghhtt::
«F» (some models only).
Indicates that the freezer is on freezing mode (S).
RReedd lliigghhtt::
«G» (some models only).
Whent lighted indicates abnormal temperature con-
ditions in the freezer, but for the exceptions appea-
ring of Pag «Freezing of Food» and Page
«Something not working».
IInntteerriioorr lliigghhtt::
Comes on when opening the door of the refrigera-
ting compartment.
When changing the light bulb, first remove the pro-
tective cover «X» (see point A-3 «IF SOMETHING
DOES NOT WORK»).
SSuuppeerr sswwiittcchh::
«E»
Allows you to choose the freezing type you want in
the freezer compartiment.
To keep the equipment in good working
order, please consult the «Freezing
of food» paragraph.
GGrreeeenn ppiilloott::
«B» (some models only).
It is on when the fridge compartiment engines is
working.
DDiinnaammiicc RReeffrriiggeerraattiioonn::
(some models only)
The Dynamic Refrigeration System give, in the
fridge compartment, extra efficiency showed in:
• Quicker refrigeration.
• More homogeneous temperature.
DAC (Dynamic Air Cooling system) has been
mainly designed for hot weather (ambient tem-
perature above 25°), and also when the refrige-
rator is plenty of food.
To start working, push the switch.
When DAC is switched on, the cold production
es higher, thus you should turn the temperature
regulator to an adequate position to avoid exce-
sive cold.