User manual

22
Maintenance of your
Refrigerator-Freezer
Unplug the appliance before performing any operations.
Removing the layer of ice from the freezer
The layer of ice inside the freezer forms very
slowly, as long as the doors are not opened too
frequently and the foods preserved are properly
wrapped.
When the layer of ice becomes more than 5 mm
thick, it must be removed. To remove it, proceed
as follows:
1... Remove the foods from the freezer and place
them in the coldest place possible.
2…Remove the drawers.
3…Remove the rubber plug (see figure 8) and
place it as shown in figure 9.
4…Place a container under the drain hole to
collect the water.
5…Remove the ice from the walls and shelves
using the plastic scraper.
• Never use sharp objects or heaters, which
could seriously damage the appliance.
• Under no circumstances should you try to rip
out the ice - wait for it to melt.
6…After removing the ice and cleaning and drying
the interior, remove the rubber plug and repla-
ce the drawers.
7…Plug in the appliance.
Fig. 8
Fig. 9