Ceramic hob ZKT 863 LX Installation and Operating Instructions g
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety The safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law. However, as manufacturers we also believe it is our responsibility to familiarise you with the following safety instructions. Safety When Cleaning • For safety reasons do not clean the appliance with a steam jet or high pressure cleaner. • Clean the hob in accordance with the maintenance and cleaning instructions in this manual.
2 Disposal Disposing of the packaging material All materials used can be fully recycled. Plastics are marked as follows: • >PE< for polyethylene, as used for the outer wrapping and the bags inside. • >PS< for polystyrene foam, e.g., as used for the padding materials. They are completely free of CFCs. Disposal of old appliances 1 Warning: Before disposing of old appliances please make them inoperable so that they cannot be the source of danger.
Description of the Appliance Cooking zones and control panel Casserole zone 2400W Single ring cooking zone 1200W Double ring cooking zone 2200W Control panel Single ring cooking zone 1200W Casserole zone sensor field Double-ring sensor field „Lock“ sensor field Sensor panel ”On/Off” Dual-ring control lamp Cooking setting selector Casserole zone control lamp “Timer” with control indicators Cooking setting selector Indicator for cooking setting/ residual warmth 6
Digital displays The four display fields, which are assigned to the four cooking zones, display: – ¾ after being switched on, – u when the keep warm setting has been selected, – ¿ to Ç, depending on the heat setting selected, – a when using automatic cooking, – h for residual heat, – l when the child lock is activated, – e with a fault 1 Safety cut-out function for the cooking zones If one of the cooking zones is not switched off after a certain period of time or the cooking setting is not altered, that pa
Before using for the first time Initial Cleaning Wipe the ceramic glass surface with a damp cloth. 1 Important: Do not use any caustic, abrasive cleaners! The surface could be damaged. Operating the hob Touch control sensor panels To operate the touch control sensor panels, touch the desired panel with the tip of your pointed finger until the relevant displays illuminate or go out, or until the desired function is carried out.
Heat settings selecting For setting and changing the heat setting (u to Ç) for the selected cooking zone. Raise the heat setting using the heat setting selector sensor panel . Lower the heat setting using the heat setting selector sensor panel . Keep warm setting Each of the 4 cooking zones has a keep warm setting u. Use the heat setting selector sensor panel to set the keep warm setting u.
Switching the casserole zone on and off 1. Set the desired heat setting. 2. To switch the casserole zone on or off, place your finger flat on the “casserole zone” sensor field until the indicator light illuminates or goes off. Switching off a cooking zone 1. To switch off a cooking zone touch the heat setting selector sensor panel and simultaneously, or return the setting to zero using the heat setting selector sensor panel .
Residual Heat Indicator When an individual cooking zone or the entire hob is switched off, any residual heat is shown with an h (for “Hot”) in the digital display for the appropriate cooking zones. Even after the cooking zone has been switched off, the residual heat indicator only goes out when the cooking zone is cold. 2 You can use the residual heat for melting and keeping food warm. 1 Important! As long as the residual heat indicator is illuminated, there is a risk of burns.
Cooking using the automatic warm up function All of the cooking surface’s four cooking zones can be adjusted to any of nine settings, and are equipped with an automatic warm up function: – ¿, lowest heat setting – Ç, highest heat setting – a, automatic warm up function.
Child safety lock You can use the child safety lock to safeguard against unwanted use of the cooking surface. Switching on the child safety lock To be able to switch on the child safety lock the appliance must be switched on, but all the cooking zones must be switched off. 1. Touch the sensor field for approx. three seconds. An acoustic signal will sound as confirmation. 2. Touch any heat setting sensor field . l will appear in the displays, and the child safety lock is activated.
Switching off the child safety lock 1. Switch on the appliance. When the child safety device has been activated, l will be displayed. 2. Touch the sensor field for approx. three seconds. An acoustic signal will sound as confirmation. 3. Touch any heat setting sensor field . The displays will become dark, and the child safety device is switched off. The appliance will switch itself off automatically after a few seconds. Timer There are two ways to use the timer: – as a safety cut-out function.
Safety cut-out The cooking zone(s) for which you want to use the safety cut-out function must be switched on. 1. Using the timer sensor panel , select the cooking zone for which the safety cut-out is to be set. By touching the timer sensor panel once the first active cooking zone is selected in a clockwise direction, and the corresponding control lamp will flash rapidly. Hereby the (e.g.) left rear control lamp corresponds to the left rear cooking zone. 00 will appear in the timer display.
Switching off the safety cut-out function before it has come to an end There are two ways to switch off the safety cut-out function before it has come to an end. Switch off the cooking zone and timer simultaneously 1. Using the heat setting selector sensor panel, reset the desired cooking zone to zero: the cooking zone and timer will switch themselves off. Switch off the timer – the cooking zone remains active 1. Select the desired cooking zone using the timer sensor panel.
Blocking/unblocking the control panel At any stage of the cooking process the control panel, with the exception of the “On/Off” sensor panel, can be blocked in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. 1. Touch the “block” sensor panel for approx. one second. The control light for the “block” sensor panel will illuminate. The sensor panels are blocked. 2. To unblock the panel, touch the “block” sensor panel again for approx. one second.
Uses, tables and tips Pans • You can recognise good pans by their bases. The base should be as thick and flat as possible. • Pay particular attention when buying new pans to the diameter of the base. Manufacturers often give only the diameter of the upper rim. • Pots with aluminium or copper bases can cause metallic discolouring on the ceramic glass surface, which is very difficult or impossible to remove. • Do not use cast iron pans or pans with a rough, burred or damaged base.
Advice on cooking with and without automatic warm up The automatic warm up function is suitable for: • dishes that start off cold, are heated up at high power and do not need to be continually watched when cooking on the selected heat setting, • dishes that are put in a hot frying pan.
Settings for Cooking on the Zones The figures in the following table are benchmark figures. The switch setting required for a certain cooking method depends on the quality of the pans and the type and amount of food. Switch setting Automatic warm up function1) (min.
Cleaning and care Hob 1 Important: Cleaning agents must not come into contact with the hot ceramic glass surface! All cleaning agents must be removed with plenty of clean water after cleaning because they can have a caustic effect when the rings are next heated! Do not use any aggressive cleaners such as grill or oven sprays, coarse scourers or abrasive pan cleaners. 3 Clean the ceramic glass surface after each use when it is warm to the touch or cold. This will avoid spillages becoming burnt on.
Stubborn Soiling 1. To remove food that has boiled over or stubborn splashes, use a glass scraper. 2. Place the glass scraper at an angle to the ceramic glass surface. 3. Remove soiling by sliding the blade. 3 You can obtain glass scrapers and ceramic glass cleaners from your local Service Force Centre. 1 Problem Dirt 1. Remove burnt-on sugar, melted plastic, aluminium foil or other meltable materials with a glass scraper immediately and while still hot.
What to do if … Rectifying faults It is possible that faults have been caused by a minor error, which you can correct yourself with the help of the following instructions. Do not attempt any further repairs if the following instructions do not help in each specific case. 1 Warning! Repairs to the appliance are only to be carried out by approved service engineers. Improperly effected repairs may result in considerable risk to the user.
Installation Instructions 1 Important! The new appliance may only be installed and connected by a registered specialist. Please observe this instruction, otherwise the warranty will not cover any damage that may occur.
1 Safety Instructions for the Installer • A device must be provided in the electrical installation which allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm Suitable isolation devices include line protecting cut-outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors. • In respect of fire protection, this appliance corresponds to type Y (EN 60 335-2-6).
Electrical Connection Diagram For UK only: 230V...
Assembly 27
Rating Plate 29
Warranty conditions Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.
Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
822 925 196-A-181104-01 Subject to change without notice The Electrolux Group. The world´s No.1 choice. The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more than 150 countries around the world.
