User manual

The hob

Lock Two

BEFORE USING ‘NUMBER TWO’ FOR THE FIRST TIME,

YOU HAVE TO ACTIVATE THE LOCK BUTTON

(see illustration B):

1 Turn the thermostat control to zero, i.e. turn the

control to the 12 o’clock position.

2 Place a table knife behind the control and

remove it by pulling gently.

3 Remove the red covering.

4 Replace the control set at ‘zero’.

Next time you will only need to turn the thermostat

control anti clockwise to

OFF to lock the cooker

(

see illustration A).

WHEN YOU WANT TO USE THE COOKER

(see illustration C):

1 Press down the lock button and keep it pressed in.

2 Turn the control clockwise to zero (i.e. turn the

control back to the 12 o’clock position).

3 The cooker can be used as normal. Make sure no

functions other than the one/those you want to use

are turned on. (Someone may have turned a

control while the lock was activated).