User manual

screen-printing zones is not rough when you

touch it.

A B

Make sure that you install the middle panel of

glass in the seats correctly.

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp glass

cover and the cavity.

WARNING!

Danger of electrocution! Disconnect

the fuse before you replace the

lamp.

The lamp and the lamp glass cover

can be hot.

CAUTION!

Always hold the halogen lamp with a

cloth to prevent grease residue from

burning on the lamp.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover counterclockwise

to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

Troubleshooting

WARNING!

Refer to Safety chapters.

What to do if...

Problem Possible cause Remedy

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are not

set.

Make sure that the settings are

correct.

The oven does not heat up. The automatic switch-off is acti-

vated.

Refer to "Automatic switch-off".