User manual

CLOCK FUNCTIONS
CLOCK FUNCTIONS TABLE
Clock function Application
TIME OF DAY
To show or change the time
of day. You can change the
time of day only when the
oven is off.
DURATION
To set how long the oven
works. Use only when a
heating function is set.
END
To set when the oven turns
off. Use only when a heat-
ing function is set.
TIME DELAY
Combination of DURATION
and END function.
MINUTE
MINDER
Use to set a countdown
time. This function has no
effect on the operation of
the oven. You can set the
MINUTE MINDER at any
time, also if the oven is off.
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows and "12:00". "12" flashes.
1. Turn the knob for the temperature to set the
hours.
2. Press to confirm and set the minutes.
The display shows
and the set hour. "00"
flashes.
3. Turn the knob for the temperature to set the
current minutes.
4. Press to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press again and
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Turn the knob for the temperature to set the
minutes and press
to confirm. Turn the knob
for the temperature to set the hours and press
to confirm.
When the set Duration time ends the signal sounds
for 2 minutes.
and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knob for the heating functions to the
off position.
SETTING THE END FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Turn the knob for the temperature to set the
hours and press to confirm. Turn the knob
for the temperature to set the minutes and
press to confirm.
At the set End time the signal sounds for 2 minutes.
and time setting flash in the display. The oven
turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knob for the heating functions to the
off position.
SETTING THE TIME DELAY FUNCTION
1. Set a heating function.
2. Press again and again until starts to
flash.
3. Turn the knob for the temperature to set the
minutes for DURATION time and press to
confirm. Turn the knob for the temperature to
set the hours for DURATION time and press
to confirm.
The display shows flashing .
4. Turn the knob for the temperature to set the
hours for END time and press to confirm.
Turn the knob for the temperature to set the
minutes for END time and press to confirm.
The display shows and the set
temperature.
Oven turns on automatically later on, works for the
set DURATION time and stops at the set END time.
9