EN User manual Fridge Freezer ZRB33104WA ZRB33104XA
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 5 5 5 7 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Troubleshooting _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
nents of the refrigerant circuit become damaged. If the refrigerant circuit should become damaged: – avoid open flames and sources of ignition – thoroughly ventilate the room in which the appliance is situated • It is dangerous to alter the specifications or modify this product in any way. Any damage to the cord may cause a short-circuit, fire and/or electric shock.
To achieve sufficient ventilation follow the instructions relevant to installation. Wherever possible the back of the product should be against a wall to avoid touching or catching warm parts (compressor) to prevent possible burn. The appliance must not be located close to radiators or cookers. Make sure that the mains plug is accessible after the installation of the appliance. Connect to potable water supply only (If a water connection is foreseen).
Control panel 6 Door shelf 8 Bottle shelf 9 Freezer drawers 7 Door shelf 10 Rating plate Operation Switching on Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting. Switching off To turn off the appliance, turn the Temperature regulator to the "O" position. Temperature regulation The temperature is automatically regulated. To operate the appliance, proceed as follows: • turn the Temperature regulator toward lower settings to obtain the minimum coldness.
or at room temperature, depending on the time available for this operation. Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking will take longer. Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. Positioning the door shelves Bottle rack Place the bottles (with the opening facing front) in the pre-positioned shelf.
2 1 Helpful hints and tips Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct. • When the compressor is on, the refrigerant is being pumped around and you will hear a whirring sound and a pulsating noise from the compressor. This is correct. • The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous physical phenomenon. This is correct.
• it is advisable to show the freezing in date on each individual pack to enable you to keep tab of the storage time.
• remove any stored food, wrap it in several layers of newspaper and put it in a cool place • remove the freezer drawers • put insulating material around the drawers, e.g. blankets or newspapers. Defrosting can be accelerated by placing bowls with hot water (not boiling) inside the freezer.
Problem Possible cause Solution The product temperature is too high. Let the product temperature decrease to room temperature before storage. The room temperature is too high. Decrease the room temperature. Water flows on the rear plate of the refrigerator. During the automatic defrosting process, frost defrosts on the rear plate. This is correct. Water flows into the refrigerator. The water outlet is clogged. Clean the water outlet. Products prevent that water flows into the water collector.
2. 3. 4. 5. 6. Gently move the transparent cover up and down and at the same time unhook it in the direction of the arrows . Replace the lamp with an original spare part or as an alternative it is possible to use the Osram PARATHOM SPECIAL T26 0.8 Watts bulb. Another alternative is to use an incandescent bulb lamp specifically designed for household appliances (see also SAFETY INFORMATION chapter) with maximum power not exceeding the light diffuser indication. Install the lamp cover.
Levelling When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front. Electrical Connection Caution! Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Warning! This appliance must be earthed. The manufacturer declines any liability should these safety measures not be observed. A B oured markings identifying the terminals in your plug, proceed as follows: 1.
7 1 2 • Remove the plugs on the upper side of both doors and move them to the other side. • Remove the lower door from the lower hinge pivot. (4) 8 • Place the lower door on the lower hinge pivot. (9) • Screw off the middle cover plugs and screw them into the hole on the opposite side. (10) • Put the middle hinge on the opposite side and fix it with the screws. (11) 10 3 4 11 • Screw off the pivot of the lower hinge (5) and screw the lower hinge pivot (6) into the left drill of the lower hinge.
Technical data Dimension Height 1845 mm Width 595 mm Depth 642 mm Rising Time 30 h Voltage 230-240 V Frequency 50 Hz The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label. Environmental concerns Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic 14 appliances.
www.zanussi.
280151667-B-192013 www.zanussi.
