User manual

• remove any stored food, wrap it in several lay-
ers of newspaper and put it in a cool place
• remove the freezer drawers
• put insulating material around the drawers,
e.g. blankets or newspapers.
Defrosting can be accelerated by placing bowls
with hot water (not boiling) inside the freezer.
• Leave the door open and insert the plastic
scraper in the appropriate seating at the bot-
tom centre, placing a basin underneath to
collect the defrosting water (the basin itself is
not included with the appliance)
• carefully scrape off the ice when it starts to
thaw (use a wood or a plastic scraper)
• when all the ice has melted, dry the interior
thoroughly and keep the scraper for future
use.
• switch on the appliance and replace the fro-
zen foodstuff.
If equipped, activate the Quick Chill function for
some hours so that it can reach the sufficient
storing temperature as soon as possible.
Caution! Never use sharp metal tools to
scrape off frost from the evaporator as you
could damage it. Do not use a mechanical
device or any artificial means to speed up the
thawing process other than those
recommended by the manufacturer. A
temperature rise of the frozen food packs,
during defrosting, may shorten their safe
storage life.
Troubleshooting
Caution! Before troubleshooting,
disconnect the power supply.
Only a qualified electrician or competent person
must do the troubleshooting that is not in this
manual.
Important! There are some sounds during
normal use (compressor, refrigerant circulation).
Problem Possible cause Solution
The appliance is noisy. The appliance is not supported
properly.
Check if the appliance stands stable
(all the four feet should be on the
floor).
The compressor operates
continually.
The Temperature regulator may be
set incorrectly.
Set a warmer temperature.
The door is not closed correctly. Refer to "Closing the door".
The door has been opened too fre-
quently.
Do not keep the door open longer
than necessary.
9
www.zanussi.com