User manual
11
Drink cool mode
When would it be used?
• This mode is used to cool the drinks within adjustable time.
How would it be used?
• Press freezer button for 3 seconds.
• dc letters will be seen on freezer screen and the 05 blinks
on cooler screen.
• Press cooler button to adjust the time (05 - 10 - 15 - 20 - 25 - 30 minutes).
• When you select the time the numbers will blink 3 times on screen and sound beep
beep.
• If no button is pressed within 2 seconds the time will be set.
• The countdown starts from the adjusted time minute by minute.
• The rest time blinks on the screen.
• To cancel this mode press freezer set button for 3 seconds.
Note: You must adjust the time according to the temperature of the bottles before you put
them in.
• For example, you can set the time as “5 minutes” in the beginning. After this time, if the
cooling is insufcient, you might set another 5 or 10 minutes.
• While using this mode, you must check the temperature of the bottles regularly. When
the bottles are cool enough, you must take them out of the appliance.
• In the event that you leave the bottles in when the Drink Cool mode is on, they might
explode.
• Holiday mode should be activated when the cooler will not be used for a long period of
time. By doing this, you will be using your fridge in a more economic manner. The cooler
must be completely emptied before vacation mode is activated.
Screen saver mode
How to use?
• This mode will be activated when you press on mode
button for 5 seconds.
• If pressed on no button in 5 seconds when he mode is
active, lights of the control panel will go off.
• If you press any button when lights of control panel are off,
the current settings will appear on the screen, and then you
can maket he adjustment as you want. If you neither cancel
screen saver mode nor press on any button in 5 seconds,
the control panel will go off again.
• To cancel screen saver mode press on mode button for 5 seconds again.
• When screen saver mode is active you can also activate child lock.
• If you do not press any button for 5 seconds after activating child lock, the lights of the
control panel will go off. Then, you can view the previous settings and that child lock
symbol is active when you pres any button, and you can cancel child lock as is described
in the instruction of that mode.