User manual

15
Visualandtextdescriptionsontheaccessoriessectionmayvary
accordingtothemodelofyourappliance.
Removing the crisper cover
First Step: Removing the crispers
• Turn the front covers of crisper to the position which back side
touch the crisper cover.
• Pull the crisper out as far as possible.
• Pull the front part up and out.
Note that; be sure that the front covers of crisper are closed before
closing the refrigerator door.
Second Step: Taking out the partition crisper center between the
crispers.
• Turn the front covers of crisper to the position which back side
touch the crisper cover.
• Bend the Partiton toward left from the bottom of the part.
• Take out the Partiton crisper.
Third Step: Taking out the crisper cover with front covers.
• Pull the crisper cover when front covers of crisper are closed.
• Pull the crisper cover up and out.
• Don't split the front covers of crisper from the crisper cover.If not,
the crisper cover can be breaked.
Fourth Step: Spliting the crisper cover from the front covers of crisper.
• Bend the pim slot where is beside to crisper cover.
• Take out the front cover of crisper.
NOTE: Make the inverse of the same operation for the resetting the crisper cover.