EN User manual Refrigerator ERC07002W8
This Quick user manual contains all the basic facts of your new product and is easy to use. Electrolux wants to lower our paper consumption related to user manuals by some 30%, which will help spare 12,000 trees every year. The Quick user manual is one of many steps taken by Electrolux for the environment. It may be a small step, but just by doing a little you do a lot. A complete user manual can be found at www.electrolux.
5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover1) of interior lighting. • This appliance is heavy. Care should be taken when moving it. • Do not remove nor touch items from the freezer compartment if your hands are damp/wet, as this could cause skin abrasions or frost/freezer burns. • Avoid prolonged exposure of the appliance to direct sunlight.
Operation Switching on Insert the plug into the wall socket. Turn the Temperature regulator clockwise to a medium setting. The Temperature Regulator is situated on the side of the cabinet. • turn the Temperature regulator toward higher settings to obtain the maximum coldness.
Warning! Never use sharp metal tools to scrape off frost from the evaporator as you could damage it. Do not use a mechanical device or any artificial means to speed up the thawing process other than those recommended by the manufacturer. What to do if… Normal Operating Sounds • You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped through the coils or tubing. This is correct.
Rear spacers In the bag with the documentation, there are two spacers which must be fitted as shown in the figure. Using fine strokes of hammer put them in their place. Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
. Fix the door hinge and the corresponding foot on the opposite side and then 2 1 the other loosened foot at the former place of the door hinge as shown in the Figure. 8. Please make sure to place the lower foot below 1. Remove the plug from 5. Remove the screw fixthe door hinge. The lower the power socket. ing the lower door hinge foot is recognizable by its 2. Remove the top hinge and the other screw fixing 4 ribs on the outer surface. cover. the lower door hinge and 9. Fix the door onto the 3.
5 Blue: Neutral As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: 1. Connect the wire coloured green and yellow to the terminal marked either with the letter “E“ or by the or coloured green and yellow. earth symbol 2. Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. 3.
200383522-UK-00-18052010 www.zanussi.