User Manual GETTING STARTED? EASY.
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
• • • • • • • • • Do not exceed the maximum load of 10 kg (refer to the "Programme chart" chapter). The operating water pressure at the water entry point from the outlet connection must be between 0.5 bar (0.05 MPa) and 8 bar (0.8 MPa). The ventilation opening in the base must not be covered by a carpet, mat, or any floor covering. The appliance must be connected to the water mains using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre.
ELECTRICAL CONNECTION WARNING! Risk of fire and electric shock. • • • • • • • • • • The appliance must be earthed. Always use a correctly installed shockproof socket. Make sure that the parameters on the rating plate are compatible with the electrical ratings of the mains power supply. Do not use multi-plug adapters and extension cables. Make sure not to cause damage to the mains plug and to the mains cable.
APPLIANCE OVERVIEW 1 2 1 Worktop 2 Detergent dispenser 3 3 Control panel 4 Door handle 5 Rating plate 6 Feet for levelling the appliance 4 5 6 INSTALLATION ON SUSPENDED FLOORING Suspended wooden floors are particularly susceptible to vibration. To limit vibration we recommend placing a waterproof wooden panel, at least 15 mm thick, under the appliance. It should be screwed to at least 2 floor beams and should extend beyond the front feet.
8 Delay start touchpad Child lock indicator Extra rinse indicator Door locked indicator PROGRAMME CHART Programme Temperature range Maximum load Reference spin speed Programme description (Type of load and soil level) 30'@30° 30°C 3 kg 800 rpm A short cycle for synthetic and delicate items with light soil level or for items to freshen up. Cottons 90°C - Cold 10 kg 1200 rpm White cotton and coloured cotton. Heavy soil and normal soil. Cotton 10 kg 1200 rpm White cotton and fast-coloured cotton.
30'@30° ■ ■ Cottons ■ ■ ■ ■ Cotton Eco ■ ■ ■ ■ Synthetics ■ ■ ■ ■ ■ Delicates ■ ■ ■ ■ ■ Wool/Handwash ■ ■ ■ Duvet ■ ■ ■ Mix 20° ■ ■ ■ ■ ■ ■ ■ Extra Rinse Delay Start Drain & Spin Rinse Easy Iron Programme Intensive Quick1) Programme options compatibility ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry.
Programmes Load (kg) Energy consumption (kWh) Water consumption (litre) Approximate Remaining programme duration (mi- moisture (%)1) nutes) Cottons 60°C 10 2,04 87 240 53 Cottons 40°C 10 1,40 83 210 53 Synthetics 40°C 4 0,80 61 140 35 Delicates 40°C 4 0,56 75 95 35 1,5 0,42 62 75 30 10 0.
• • Set this option for very delicate fabrics. The rinses phase uses more water for some washing programmes. Rinse Hold • Set this option to prevent the laundry creases. • The related indicator comes on. • There is a water in the drum when the programme is completed. • The drum turns regularly to prevent the laundry creases. • The door stays locked. You must drain the water to unlock the door. To drain the water refer to ‘At the end of the programme’.
• The appliance has a malfunction. To deactivate/activate the acoustic signals, touch the buttons seconds. and at the same time for 4 If you deactivate the acoustic signals, they continue operate when the appliance has a malfunction. BEFORE FIRST USE During installation or before first use you may observe some water in the appliance.
LIQUID OR POWDER DETERGENT The default position of the flap is A (powder deA tergent). To use liquid detergent: 1. Remove the drawer. Push the drawer edge in the place with the arrow (PUSH) to remove the drawer easily. SETTING A PROGRAMME 1. Touch the programme button programme: • The indicator of the button flashes slowly. 2. If necessary, change the temperature and the spin speed or add available options. When you activate an option, the indicator of the set option comes on.
INTERRUPTING A PROGRAMME AND CHANGING THE OPTIONS You can change only some options before they operate. 1. Touch . The indicator of this button flashes. 2. Change the options. 3. Touch again. The programme continues. CANCELLING A PROGRAMME 1. Press the button On/Off for some seconds to cancel the programme and to deactivate the appliance. 2. Press the same button again to activate the appliance. Now, you can set a new washing programme. for some seconds to Press the button deactivate the appliance.
HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts. • Empty the pockets and unfold the items.
Regularly examine the drum to prevent limescale and rust particles. To remove rust particles use only special products for washing machines. Do this separately from the laundry wash. off the clothes to be drained out with the water, in such a way that there is no need to access this area for regular maintenance and cleaning. Always obey the instructions that you find on the packaging of the product. MAINTENANCE WASH With the low temperature programmes it is possible that some detergent stays in the drum.
FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain. 5. Set any selected programme with option Drain & Spin and let it operate until the end of the cycle. 6. When no more water flows, install the inlet hose and the drain hose again. 7. Press the On/Off button to deactivate the appliance.
POSSIBLE FAILURES Problem The programme does not start. Possible solution • • • • • • The appliance does not fill with water properly. • • • • • • The appliance does not drain the water. • • • • • • The spin phase does not operate or the washing cycle lasts longer than usually. • • • • There is water on the floor. • • • Make sure that the water tap is open. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
Problem Possible solution The appliance fills with water and drain immediately. • Make sure that the drain hose is in the correct position. The end of the hose may be too low. Refer to 'Installation instruction'. The cycle is shorter than the time displayed. • The appliance calculates a new time according to the laundry load. See the ‘Consumption Values’ chapter. The cycle is longer than the time displayed. • An unbalanced laundry load increases the duration time.
Spin Speed Maximum spin speed 1151 rpm 1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your domestic cold water storage system. Make sure not to exceed a distance of 5.02 m (16.5 ft) between the appliance inlet hose and the bottom of the water storage tank. 2) Connect the water inlet hose to a water tap with a 3/4'' thread.
Programme time of the standard 60°C cotton programme at partial load in minutes 206 Programme time of the "standard 40°C cotton programme at partial load in minutes 203 Duration of the left on mode in minutes 5 Airborne acoustical noise emission in db(A) washing 54 Airborne acoustical noise emission in db(A) spinning 78 Built in appliance Y/N No The information given in the chart above is compliant with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC .
192938881-A-292018 WWW.ZANUSSI.