User manual

17
Operating sequence
The display shows the following information:
Duration of the selected programme
After selecting a programme, the duration is
displayed in hours and minutes (for example
2.05). The duration is calculated automatically
on the basis of the maximum recommended
load for each type of fabric.
After the programme has
started, the time
remaining is updated
every minute.
ATTENTION!
When selecting the «proportional»
programmes, the diplay shows the washing
duration of the maximum recommended load.
After Start/Pause has been pressed, an arrows
animation appears on the display indicating
that the appliance is calculating the laundry
amount and the real duration.
During this time, the washing duration shown
decreases
When the calculating phase has finished, the
arrows animation disappears from the display
and the washing time is adjusted to the real
load.
Washing programme phase icons
By selecting the wash programme, the washing
programme phase icons corresponding to the
various phases making up the programme are
shown in the bottom of the display.
Start/Pause
Lock
2.05
After the machine has started, only the running
icon stays on. When the programme has
finished, a flashing zero «0.00» is displayed.
Delayed start
The selected delay (20 hours max) set by
means of the relevant button appears on the
display for about 3 seconds, then the duration
of the previously selected programme is
displayed.
The delay time value
decreases by one unit
every hour and then,
when 1 hours remain,the
time decreases every
minute.
ncorrect option selection
If an option which is not
compatible with the set
wash programme is
selected, the message
Err is displayed for about
2 seconds and the integrated red Start/Pause
light start flashing.
Alarm codes
In the event of operating
problems, some alarm
codes can be displayed,
for example E20 (see
paragraph “Something
not working”).
Heating phase
During the washing cycle
the display shows a
temperature icon
illuminated to indicate
that the appliance has
started the heating phase
2.05
E20
2.05
2.05
Smart 132973880.qxd 02/07/2008 11.41 Pagina 17